Memory Function; Tracks - Casio CTK-573 User Manual

Memory Function

You can store up to two separate songs in memory for later playback.
The memory function records your keyboard play in real time, as
you play it.

Tracks

The memory of this keyboard records and plays back notes much
like a standard tape recorder. There are two tracks, each of which can
be recorded separately. Besides notes, each track can be assigned its
own tone number. During playback you can adjust the tempo to
change the speed of playback.
Start
Auto Accompaniment
Track 1
(rhythm, bass, chords), melody
Track 2 Melody
NOTES
• Track 1 is the basic track, which can be used to record Auto Accompa-
niment along with the melody. Track 2 can be used for melody only, and
is for adding to what is recorded in Track 1.
• Note that each track is independent of the other. This means that if you
make a mistake while recording, you need to re-record only the track
where the mistake was made.
Memory Button Operation
Each press of the MEMORY button cycles through the functions
shown below.
Playback Record
Standby Standby
MEMORY MEMORY
Lit Flash
702A-E-029A
Selecting a Track
Press the LEFT/TRACK 1 button to select Track 1 and the RIGHT/
TRACK 2 button to select Track 2. The letter "L" (left) appears on the
display to indicate Track 1 is selected, and the letter "R" (right) ap-
pears to indicate Track 2 is selected.
Playback
Each press of the LEFT/TRACK 1 and RIGHT/TRACK 2 button while
the keyboard is in playback standby (see "Memory Button Opera-
tion" above) toggles playback of the corresponding track on and off.
The letter that identifies a track (L or R) appears on the display when-
ever playback of that track is turned on.
End
Data recorded in track
• With the above setting, Track 1 will play while Track 2 will not play.
Record
Each press of the LEFT/TRACK 1 and RIGHT/TRACK 2 button while
the keyboard is in record standby (see "Memory Button Operation")
toggles recording to the corresponding track on and off. The letter
that identifies a track (L or R) flashes on the display whenever re-
cording to that track is turned on.
Normal
MEMORY
• The above indicates that Track 1 will play back while Track 2 is
Unlit
being recorded to.
Track 1
Playback
turned on
Playback
turned on
Track 2
Playback
turned off
Record
turned on
E-27