Table of Contents
Advertisement
Adjusting the Tempo
Each tune has a preset default tempo (beats per minute) that is set
automatically whenever you select a tune. While the tune is playing,
you can change the tempo setting to a value in the range of 40 to 255.
To set the tempo
Use the TEMPO buttons to set the tempo.
: Increases the tempo value.
: Decreases the tempo value.
NOTES
• While the tempo value is flashing, you can also use the number buttons
or [+] and [–] to input a three-digit value. Note that you must input lead-
ing zeros, so 90 is input as 090.
• Pressing both the
and
TEMPO buttons at the same time automat-
ically returns the currently selected rhythm to its default tempo.
• Etude and Concert Piece tunes have tempo changes part way through
in order to produce specific musical effects. Note that the tempo setting
automatically returns to the default whenever a tempo change occurs
within one of these tunes.
To pause playback
1.
Press the PLAY/PAUSE button while a tune is playing
to pause it.
2.
Pressing the PLAY/PAUSE button again resumes play
from the point where it was paused.
NOTE
After you press STOP to stop playback, pressing PLAY/PAUSE restarts
play from the beginning of the tune.
To fast reverse
1.
While a tune is playing or paused, hold down the REW
button to skip in a reverse direction at high speed.
• The fast reverse operation skips back one measure at a time.
• The measure and beat numbers on the display change while
the fast reverse operation is being performed.
Measure number
2.
Releasing the REW button starts song playback from
the measure whose number is shown on the display.
NOTE
Fast reverse does not work while Song Bank play is stopped.
702A-E-025A
Tempo value
Flash
Beat number
To fast forward
1.
While a tune is playing or paused, hold down the FF
button to skip forward at high speed.
• The fast forward operation skips forward one measure at a
time.
• The measure and beat numbers on the display change while
the fast forward operation is being performed
Measure number
2.
Releasing the FF button starts song playback from the
measure whose number is shown on the display.
NOTE
Fast forward does not work while Song Bank play is stopped.
To change the melody tone
1.
While a tune is playing or paused, press the TONE
button.
Indicates TONE was pressed.
2.
Find the tone you want in the TONE List, and then
use the number buttons to input its three-digit num-
ber.
Example: To select "040 VIOLIN", input 0, then 4, then 0.
• You can select any one of the keyboard's 137 built-in tones.
NOTES
• You can also use the [+] and [–] buttons to change the melody tones.
• For two-hand tunes (Etude and Concert Piece tunes), the same tone is
applied for both the left and right hand parts.
• Specifying the tune number for the same tune that is currently selected
returns the melody tone to the default setting for that tune.
To play all tunes in succession
1.
Press the DEMO button.
• Playback starts from Song Bank tune number 00, followed in
sequence by Etude, and then Concert Piece tunes.
2.
To stop Song Bank tune play, press the DEMO, STOP,
or START/STOP button.
NOTES
• While a tune is playing, you can use the number buttons or [+] and [–] to
change to another tune.
• You can play along with the tunes on the keyboard.
• Pressing the SONG BANK, ETUDE or CONCERT PIECE button what
playback is in progress jumps to tune number 00 of the corresponding
group.
Beat number
E-23
Hide quick links:
Advertisement
Table of Contents
