Playing Back From Memory - Casio CTK-573 User Manual

Casio ctk-573: users guide
Hide thumbs Also See for CTK-573:
Table of Contents

Advertisement

Memory Data Storage
• Anything previously stored in memory is replaced whenever you
make a new recording.
• Memory contents are retained as long as the keyboard is supplied
with electrical power. Unplugging the AC adaptor when batteries
are not loaded or when loaded batteries are dead cuts off the key-
board's electrical power supply, causing all data stored in memory
to be deleted. Be sure to plug the keyboard into an electrical outlet
with the AC adaptor before replacing batteries.
• Turning off the keyboard while a record operation is in progress
causes the contents of the track you are currently recording to be
lost.
Track 1 Real-time Recording Variations
The following describes a number of different variations you can use
when recording to Track 1 using real-time recording. All of these vari-
ations are based upon the procedure described under "To record to
Track 1 using real-time recording" on page E-28.
To record without rhythm
Skip step 5. Real-time recording without rhythm starts when you press
a keyboard key.
To start recording with synchro start
In place of step 5, press the SYNCHRO/ENDING button. Auto Ac-
companiment and recording will both start when you play a chord
on the accompaniment keyboard.
To record using an intro, ending, or fill-in
During recording, the INTRO, SYNCHRO/ENDING, NORMAL/
FILL-IN, and VARIATION/FILL-IN buttons (pages E-19 through E-
20) can all be used as they normally are.
To synchro start Auto Accompaniment with an intro pat-
tern
In place of step 5, press the SYNCHRO/ENDING button and then
the INTRO button. Auto Accompaniment will start with the intro
pattern when you play a chord on the accompaniment keyboard.
To start Auto Accompaniment part way into a recording
In place of step 5, press the SYNCHRO/ENDING button and then
play something on the melody keyboard to start. When you reach
the point where you want Auto Accompaniment to start, play a chord
on the accompaniment keyboard.
702A-E-031A

Playing Back from Memory

Use the following procedure to play back memory contents.
To play back from memory
1.
Use the MEMORY button to enter playback standby,
and then use [+] and [–] to select 0 or 1 as the song
number.
• The above song number screen remains on the display for
about five seconds. If it disappears before you have a chance
to select a song number, use the MEMORY button to display
it again.
2.
Press the START/STOP button to start playback of the
song you selected.
• During memory playback you can use the LEFT/TRACK 1
and RIGHT/TRACK 2 buttons to turn playback of either
track on or off.
ETUDE
CONCERT
PIECE
Indicator appears
• You can use the TEMPO buttons to adjust the tempo.
3.
Press the START/STOP button again to stop playback.
NOTES
• During memory playback, the entire keyboard functions as a melody
keyboard, regardless of the MODE switch setting.
• You can play along on the keyboard while playing back from memory.
You can also use layer (page E-32) and split (page E-32) to play along
with more than one tone.
• You cannot use pause, fast forward or fast reverse operations with mem-
ory playback.
LAYER
SPLIT
GM
TOUCH
RESPONSE
MEMORY
E-29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ctk-571

Table of Contents