Fujitsu FP-510II User Manual page 57

- Cleaning the Upper cutter
Using a general-purpose utility knife, flathead screwdriver, or similar
tool, remove the adhesive matter adhering to the inner side and edge
of the Upper cutter.
Caution: Be very careful not to damage the edge of the Upper cutter when
handling the utility knife or screwdriver. Also take care not to
dent or otherwise damage the platen roller. A dent on the platen
roller may result in incomplete printing or line feed errors.
Using the cleaning sheet or a similar material, wipe off the
adhesive matter adhering to the Upper cutter.
Upper cutter
Warning: Although the edge of the Upper cutter is not as sharp as the edges
of the utility knives generally used in offices, there is a risk of
injury to a finger that is moved while pressed directly against the
edge of the cutter.
Upper cutter
56 / 125