Advertisement
Quick Links
BATTERY DRIVE, MICRO LINE THERMAL PRINTER
3" TYPE MECHANISM AND INTERFACE BOARD
FTP-633MCL400/FTP-623DCL002
OVERVIEW
This battery driven, micro line thermal printer offers high speed
printing for 3-inch wide paper (70 mm). It is suitable for portable
equipment that requires compact, lightweight components.
In addition to the interface board, a driving LSI (MCU + Gate
Array) is also available.
HIGHLIGHTS
• Driven by batteries (direct connect between thermal
head and batteries)
It can be driven by a broad range of voltages (4.2 to 8.5 V) of
NiCd or Nickel-Hydrogen by using Fujitsu Components'
unique head drive control system. The battery pack can be
connected directly to the print head without a voltage
regulator. Also, a lithium-ion battery can be applied.
• High speed printing
It can print at approximately 24 character lines/s (460
dotlines/s = 60 mm/s).
• Compact and lightweight
It has a light weight of approximately 84 g.
• Low power consumption
The peak current for head driving is approximately 3.0 A.
• Selectable paper paths
Front, rear and top paper insertion paths can be used.
• Paper auto loading function
Paper feeding is enabled by operating the head up lever.
• Variety of suitable paper
This model is capable of printing on a variety of papers,
including 1-ply roll paper, 2-ply paper (TCC and roll), labels,
and long-life paper.
FTP-633MCL400
FTP-623CU001, FTP-633GA101
FTP-623DCL002
1
Advertisement
Related Manuals for Fujitsu FTP-633MCL400
Summary of Contents for Fujitsu FTP-633MCL400
- Page 1 It can be driven by a broad range of voltages (4.2 to 8.5 V) of NiCd or Nickel-Hydrogen by using Fujitsu Components' unique head drive control system. The battery pack can be connected directly to the print head without a voltage regulator.
-
Page 2: General Specifications
Printing mode Maximum printing speed Character types Character grade mode Character composition, dimensions (H W), Number of columns (standard) Interface FTP-633MCL400/FTP-623DCL002 Specifications Thermal-sensitive line dot method 512 dots/line 0.125 mm (8 dots/mm)—Dot density 0.125 mm (8 dots/mm)—Line feed pitch 64 mm... - Page 3 *1: Character composition for single density reduced mode is the same as for single density standard mode. *2: The data to be printed is automatically read out by the printer driver equipment memory (host system frame memory). The communication is parameter transfer.
-
Page 4: Printer Mechanism
DIMENSIONS Printer mechanism FTP-633MCL400 (14) (1): Head down (2): Paper feed (3): Head up lock Photo interrupter FTP-633MCL402 (14) (1): Head down (2): Paper feed (3): Head up lock Photo interrupter FTP-633MCL400/FTP-623DCL002 74.5 12.5 Paper center (Photo interrupter) 70.2 (Paper insertion) 74.5... - Page 5 FTP-633MCL400/FTP-623DCL002 Interface board 108.0 102.9 69.8 ø3.6 73.7 16.5 102.9 Height of devices side Height of solder side Unit: mm...
- Page 6 INTERFACE 1. Centronics standard (1) Connector Connector part number : FCN-215Q030-G/0 (Fujitsu Components) or equivalent Mating connector part number : FCN-217Q030-G/0 (Fujitsu Components) or equivalent (2) Connector pin assignment Signal PRSTB Data strobe PRDT0 Data 0 PRDT1 Data 1 PRDT2...
-
Page 7: Bus Interface
2. Bus interface (1) Connector Connector part number : FCN-215Q040-G/0 (Fujitsu Components) or equivalent Mating connector part number : FCN-217J040-G/0 (Fujitsu Components) or equivalent : FCN-214J040-G/0 (Fujitsu Components) or equivalent : FCN-215J040-G/0 (Fujitsu Components) or equivalent (2) Connector pin assignment... -
Page 8: Connector Pin Assignment
: B6B-XH-A-WHITE (J.S.T) or equivalent Mating connector part number : XHP-6 (J.S.T) or equivalent Signal Contents — Power supply for head/motor — Power supply for head/motor — Head/motor ground FTP-633MCL400/FTP-623DCL002 P.C.B side Cable side Signal — Logic ground P.C.B side Cable side Signal —... - Page 9 Mating connector part number : XHP-3 (J.S.T) or equivalent Signal Contents TMPER Abnormal head temperature detection — Logic ground Note: This signal detects abnormal head temperature. FTP-633MCL400/FTP-623DCL002 P.C.B side Signal — Power for head — Head ground Printing data latch...
- Page 10 Paper auto loading detection SLED — Power for diode cathode MT/B0 Stepping motor coil excitation (B) MT/A0 Stepping motor coil excitation (A) 10 FTP-633MCL400/FTP-623DCL002 P.C.B side Mechanism side Signal — Power for switch — Power for photointerrupter Paper out detection...
- Page 11 Automatic paper loading length set Automatic printing speed set Printer initialization Notes: *: “SP” means the space code (20H). Bus interface uses different commands. FTP-633MCL400/FTP-623DCL002 Command LF, CR Prints buffer data and return the line. Sets the double width character. DC2, DC3 Reduces the power consumption during standing Resets the double with character.
- Page 12 Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: marcom@fcai.fujitsu.com Web: www.fcai.fujitsu.com © 2001 Fujitsu Components America, Inc. All company and product names are trademarks or registered trademarks of their respective owners. Rev. 09/2001 FTP-633MCL400/FTP-623DCL002 Part number FTP-621Y202...