Table of Contents
Advertisement
Setup menu list (continued)
META DATA screen
Item
(Camera)
CARD READ
(Camera)
RECORD
(Camera)
USER CLIP
NAME
(Camera)
META DATA
PROP
(Camera)
CLIP
COUNTER RST
META INIT SET (Camera)
OTHER FUNCTIONS screen
Item
(Camera)
LENS CHECK
(Camera)
IR REMOTE
(PB)
(Camera)
TALLY LAMP
(Camera)
CLOCK SET
(PB)
62
Display
mode
Loads the metadata recorded on the SD Memory Card on to the unit.
SLOT1, SLOT2, NO
• "NO FILE' is displayed when no metadata is recorded on the SD Memory Card.
Sets whether to record the metadata to be loaded on the unit simultaneously on
a SD Memory Card.
ON:
Records simultaneously
OFF:
Does not record simultaneously
Selects the method of recording the USER CLIP NAME.
TYPE1: The user clip name is the same as the CLIP NAME if no uploaded
metadata or data exists.
TYPE2: The user clip name is the same as the CLIP NAME if no combination of
data and COUNT value is uploaded, or if no uploaded data exists.
Displays the metadata recorded in the unit.
YES, NO
Resets the COUNT value to 1.
YES, NO
Initializes the metadata recorded in the unit.
All settings, including the ON or OFF setting for RECORD are now cleared.
YES, NO
Display
mode
ON:
Checks the communication status with the lens. Video shooting is not
performed if checking is not proper.
OFF:
Does not check the communication status with the lens.
• It is recommended to set LENS CHECK to ON when you are using lenses
conforming to the Micro Four Thirds and Four Thirds standard.
• When you are using a lens that has no communication connection between the
camera and lens through the use of a mount adaptor, video shooting is enabled
when you set this item to OFF.
Sets the operations of the supplied remote control unit.
ON:
Accepts commands from the remote control.
• Note that if the same type of remote control is used near the
unit, the unit may receive commands from the other remote
control, during shooting for example, and suddenly operate in an
unexpected manner.
OFF:
Does not accept commands from the remote control.
Sets lighting of the tally lamp.
FRONT: The front tally lamp (microphone side) lights.
REAR: The rear tally lamp (viewfinder side) lights.
BOTH: Both tally lamps light.
OFF:
No tally lamp lights.
Sets the built-in calendar of the camera.
Description of settings
Description of settings
indicates the factory setting.
Advertisement
Table of Contents
