Table of Contents
Advertisement
7 Teaching switch
8 Information switch
9 Feed amount display switch
!0 One-shot stitching switch
!1 With/without automatic
thread trimmer switch
!2 Thread trimming
prohibiting switch
!3 Counter value setting
switch
!4 Max. speed limitation variable
resistor
!5 Power display lamp
!6 Smart media cover
!7 Smart media slot
(Smart media inserting opening)
This is the switch to set the setting of the number of stitches with
the value of number of stitches which has been actually sewn.
This is the switch to perform various function settings.
* LZ-2290A-SR only
Normal feed amount and reverse feed amount of the pattern
which is selected at present are displayed.
A : Reverse feed amount
B : Normal feed amount
* The above amounts are not displayed at
the time of cycle stitching.
A
B
When this switch is set to effective at the time of program
stitching, the sewing machine automatically operates up to the
specified number of stitches.
When this switch is set to effective at the time of program
stitching, the sewing machine automatically performs thread
trimming when the specified number of stitches has been
completed.
This switch prohibits all thread trimmings.
* This switch cannot be used with the sewing machine which is
not provided with the automatic thread trimming device.
This is the switch to set the value of bobbin thread counter or No.
of pcs. counter.
When moving the resistor in the left direction, max. speed is
limited.
This lamp lights up when the power switch is turned ON.
This is the cover for smart media inserting opening.
To open the cover, place your finger on the notch located on the
side of the cover as shown in the figure and push the cover in the
direction of left slanting rear.
Do not close the cover unless smart media is completely inserted.
To set smart media, insert smart media into smart media slot and
push it until it is almost hidden.
To remove smart media, push it further again and it protrudes to
the position where it can be held between your fingers. Now, draw
it out.
* Be very careful of the inserting direction of smart media.
91
−
−
Advertisement
Table of Contents
