JUKI IP-100A Engineer's Manual page 76

6) Press switch 6 to display the sewing common data screen.
Information screen (Operator level)
7) Press switch 7 from the first screen of sewing common data setting to display the second screen.
The first screen of sewing common data setting
8) Press switch 8 for approximately three seconds from the second screen of sewing common data
setting to change to the third screen.
The second screen of sewing common data setting
9) Press switch 9 from the third screen of sewing common data setting to change to the reverse feed
control lever adjustment screen.
The third screen of sewing common data setting
Procedures of disassembling/assembling
6
72
−
7
8
9
−