Safety Precautions - Capital PSQ24WK Installation Manual

SAFETY PRECAUTIONS

IMPORTANT INSTALLATION INFORMATION
1. Before beginning, please read these instructions completely and carefully.
2. Do not remove permanently affixed labels, warnings, or plates from product.
3. Please observe all local and national codes and ordinances.
4. Please ensure that this product is properly grounded.
NOTE:
To eliminate the risk of accidental fire or burns, cabinet storage located above the units should be
avoided. Check local building codes for the proper method of wok installation. Local codes vary.
Installation, electrical connections, and grounding must comply with all applicable codes. In the
absence of local codes, the wok should be installed in accordance with the National Fuel Gas Code
ANSI Z223.1-1988 and National Electrical Code ANSI / NFPA 70-1990.
Verify that the wok/cooker is compatible with gas supply at the installation site before
proceeding further. Return the wok to dealer if the unit is not set for site gas supply.
FOR YOUR SAFETY
If you smell gas:
1. Shut off gas to appliance
2. Extinguish any open flame
3. Open cover
4. If odor continues, immediately
call your gas supplier or fire
department.
FOR YOUR SAFETY
1. Do not store or use gasoline or other
flammable vapors and liquids in the
vicinity of this or any other appliance.
2. An LP cylinder not connected for use
shall not be stored in the vicinity of
this or any other appliance.
3