Connecting Ac Power - Radio Shack 43-938 Owner's Manual

43-938.fm Page 21 Thursday, July 8, 1999 6:51 AM

CONNECTING AC POWER

To power the CID, plug the supplied AC adapter's
barrel plug into the
DC 6V
CID. Then connect the other end of the adapter
to a standard AC outlet.
Caution: You must use a Class 2 power
!
source that supplies 6 volts DC and de-
livers at least 150 mA. Its center tip must
be set to negative and its plug must fit the CID's
DC 6V jack. The supplied adapter meets these
specifications. Using an adapter that does not
meet these specifications could damage the CID
or the adapter.
jack on the back of the
21