Ddtmf Transmission; D Receiving A Stun, Kill And Revive Command - Icom IDAS F3201DEX 14 Operating Instructions Manual

3
BASIC OPERATION
Receiving and transmitting (Continued)
D DTMF transmission
If the transceiver has [DTMF Autodial] assigned to it,
the automatic DTMF transmission function is usable.
Push [DTMF Autodial] to transmit the DTMF code.
➥
D Receiving a Stun, Kill and Revive command
The dispatcher can send a signal that will stun, kill or
revive your transceiver.
When the Stun command is received, a beep sounds*,
and the transceiver becomes unusable. Receiving a
Revive command is necessary to operate the trans-
ceiver again in this case.
When the Kill command is received, a beep sounds*,
and the transceiver becomes unusable. Cloning the
transceiver is necessary to operate the transceiver
again in this case.
* Depending on the presetting.
3-6