Table of Contents
Advertisement
7
DSC OPERATION
D Transmitting a Position Request Call
Transmit a Position Request Call when you want to know a
specific ship's current position, etc.
Enter "POSITION REQUEST" in the DSC CALLS menu.
q
➪
MENU
DSC
(Push [MENU]) (Select icon)
Select the desired pre-programmed individual address, or
w
"Manual Input," using dial or [Y]/[Z], then push [ENT].
• The ID code for the Position Request Call can be set first. (p. 19)
• When "Manual Input" is selected, set a desired 9 digit MMSI ID
code for the individual you wish to call.
37
➪
Position Request
(Rotate dial, then push [ENT].)
About Manual Inputting:
Enter a desired individual ID in the following way:
• Select a desired number using [Y]/[Z]/[Ω]/[≈].
• Push [ENT] or dial to set it.
• To move the cursor, rotate dial or select either arrow, "←" or "→,"
then push [ENT] or dial.
• The first digit is specified as '0' for a Group ID. If a Group ID is
entered, an error beep sounds after pushing [FINISH].
• The first two digits are '0' for any coast station ID.
e A confirmation screen is displayed.
• Confirm the call contents.
Advertisement
Table of Contents
