Menu Screen Items - Icom IC-M506EURO Instruction Manual

Menu screen items

■
The Menu screen contains the following items.
D DSC
Item Ref.
• Individual Call p. 27
• Individual ACK* 1 p. 30
• Group Call p. 32
• All Ships Call p. 34
• Distress Call p. 22
• Received Call Log p. 58
D CONFIG (Configuration)
Item Ref.
• Backlight p. 86
• Display Contrast p. 86
• Key Beep p. 86
• Key Assignment p. 87
• Key Movement p. 87
* 1 Appears only after receiving a corresponding call.
2
* Appears only when no GPS information is received.
3
* Appears only when the optional HM-195 is connected.
4
* Appears only when a GPS receiver compatible with NMEA 0183
(ver. 2.0 or later) or NMEA 2000 is connected.
5
* Appears only when the voice scrambler unit is installed.
6
* Appears only for the Dutch and German version transceivers.
Item Ref.
• Transmitted Call Log p. 60
• Position Reply* 1 p. 40
• Polling Reply* 1 p. 44
• Test Call p. 36
1
• Test ACK* p. 38
Item Ref.
• UTC Offset p. 88
• Horn Frequency p. 88
• Inactivity Timer p. 88
• Unit ID p. 89
• COMMANDMIC SP* 3 p. 89
MENU SCREEN OPERATION
D MMSI/GPS
The transceiver shows the programmed MMSI and ATIS
codes, GPS information* 4 , and installed option unit.
If the code is not programmed, "NO DSC MMSI" is displayed.
D DSC SET
Item Ref.
2
• Position Input* p. 21
• Individual ID p. 18
• Group ID p. 19
• Individual ACK p. 61
• Position ACK p. 61
• Test ACK p. 61
D RADIO SET
Item Ref.
• Scan Type p. 90
• Scan Timer p. 90
• Dual/Tri-Watch p. 90
• CHAN Group p. 90
• CALL CHAN p. 91
11
*
Item Ref.
• CH 16 Switch p. 62
• DSC Data Output p. 63
• Alarm Status p. 63
• CH 70 SQL Level p. 64
• DSC Loop Test p. 64
Item Ref.
5
• Voice Scrambler* p. 91
• Noise Cancel p. 92
• Voice Record p. 93
• FAV on MIC p. 93
1
2
6
3
4
5
6
7
8
9
10
11
12
13
14
15
16
85