How To Install A Dimm Module - Biostar M7VIK User Manual

How to install a DIMM Module

1. The DIMM socket has a
" Plastic Safety Tab", and the
DIMM memory module has an
"Asymmetrical notch", so the
DIMM memory module can only
fit into the slot in one direction.
2. Push the tabs out. Insert the
DIMM memory modules into the
socket at a 90-degree angle, then
push down vertically so that it will
fit into the place.
3. The Mounting Holes and plastic
tabs should fit over the edge and
hold the DIMM memory modules
in place.
5