How To Install A Dimm Module - Biostar BVK2A Manual

Chapter 1 Motherboard Description

1.8.2 How to install a DIMM Module

1. The DIMM socket has a " Plastic Safety
Tab" and the DIMM memory module has an
asymmetrical notch", so the DIMM memory
module can only fit into the slot in one
direction.
2. Push the tabs out. Insert the DIMM memory modules into the socket at a 90-degree
angle then push down vertically so that it will fit into place.
3. The Mounting Holes and plastic tabs should fit over the edge and hold the DIMM
memory modules in place.
1-27