Installing The First Projector (Set A); Deciding Installation Position; Setting Up Set A - Dukane 8983W User Manual

Installation

2.2 Installing the first projector (Set A)

Deciding installation position

Decide the position of Set A and its projection angle.
→ Arrangement
WARNING ►It is possible to install the projector for any direction with specified
mounting accessories. Consult with your dealer about such a special installation.
• Set the tilt angle of Set A to within 5 degrees from the level line.
NOTE

Setting up Set A

1.
Turn on Set A.
2.
Perform the INSTALLATION setting first if necessary as it may change the
image position.
3.
Adjust the image of Set A to fit the screen with the ZOOM, FOCUS and LENS
SHIFT features.
Adjust the image position using KEYSTONE and PERFECT FIT if necessary.
(Operating Guide
• KEYSTONE, PERFECT FIT, or WARPING function cannot be used
NOTE
at the same time. Please use an appropriate function.
• If you are using Simple Stack, go to
B). ( 8 )
(Set
(continued on next page)
6
and Adjusting the projector's
(Operating Guide
(Operating Guide
→ EASY MENU
(User's Manual (concise)
elevator)
→ SETUP menu
→ Adjusting the
or SETUP menu)
2.3 Installation of the second projector
)
lens)