2.2 Installing the first projector (Set A)
Deciding installation position
Decide the position of Set A and its projection angle.
→
Arrangement
WARNING ►Only for
to install the projector for any direction with specified mounting accessories.
Consult with your dealer about such a special installation.
• Set the tilt angle of Set A to within 9 degrees from the level line.
NOTE
Setting up Set A
1.
Turn on Set A.
2.
Perform the INSTALLATION setting first if necessary as it may change the
image position.
3.
Adjust the image of Set A to fit the screen with the ZOOM, FOCUS and LENS
SHIFT features.
Adjust the image position using KEYSTONE and PERFECT FIT if necessary.
(Operating Guide
• KEYSTONE cannot be operated when PERFECT FIT is in use.
NOTE
To adjust the image using both KEYSTONE and PERFECT FIT, adjust
KEYSTONE first.
• If you are using Simple Stack, go to
B). ( 8 )
(Set
(continued on next page)
and
Adjusting the projector's
,
(Operating Guide
(Operating Guide
→
EASY MENU
(User's Manual (concise)
elevator)
and
, it is possible
→
SETUP menu
→
Adjusting the
or
SETUP
menu)
2.3 Installation of the second projector
6
Installation
)
lens)