Table of Contents
Advertisement
Parameters:
out -
mte -
Query:
OMUTE? out
Returns the selected output mute status in the format:
=mte
Example:
OMUTE 2 1
Command:
OSTAT out
Description:
Displays output information (i.e. which input video/audio # routed, audio level, etc).
Parameters:
out -
(Note: this parameter is optional, if no parameter exist, all output information (i.e. 1-8) will be
displayed.
Example:
OSTAT 1
OSTAT
Command:
PSTAT out
Description:
Displays preset information (i.e. preset valid, which input video/audio # routed, audio level, etc).
Parameters:
out -
(Note: this parameter is optional, if no parameter exist, all preset information (i.e. 1-16) will be
displayed.
Example:
PSTAT 1
PSTAT
Command:
PRST num
Description:
Saves current front panel configuration/routing to a Preset location
Parameters:
num -
Example:
PRST 1
Command:
RPRST num wr_flash
Description:
Recall an existing preset from a preset location and update current front panel configuration/routing
If no preset information has been saved to the preset location, no changes are made. If wr_flash
bit is enabled, then the recall becomes the start up configuration.
Parameters:
num -
wr_flash – Enables recall to become start up configuration [1|0]
Example:
RPRST 1 0
configuration.)
Command:
RESETMP op
Description:
Resets the system to factory defaults
Parameters:
op -
Example:
RESETMP F
Command:
RTEMP out in audio
Description:
Routes input to output. If the output is in a group, all the outputs in the group will be routed to the
input specified. If the output is in a I/O group but the input is not in the group, the command will be
ignored.
Parameters:
out -
in -
audio - Audio Input number to route audio; [1-12] / 101 if no audio to add / 0 unroutes input
34
MatrixPRO 12x - 12 Input Matrix Switcher
Output number; [1 - 8]
Mute status; [0|1], Disable|Enable
(Mute output 2.)
Output number; [1 – 8]
(Displays output status for output 1.)
(Displays output status for all outputs.)
Preset number; [1 – 16]
(Displays preset status for preset 1.)
(Displays preset status for all presets.)
Preset number to save to; [1 – 16]
(Saves configuration to preset location 1.)
Preset number to recall from; [1 – 16]
(Recalls configuration from preset location 1 and doesn't become start up
Reset operation; [R|F], Restart|Factory
(Resets system to factory defaults and resets all user saved presets.)
Output number; [1 - 8]
Video Input number to route video; [1-12] / 101 if no input to add / 0 unroutes input
Manual # 26-0301000-00 / Revision C
Advertisement
Table of Contents
