Table of Contents
Advertisement
During queue processing, no input buffer processing is performed. Characters sent through the serial port during
queue processing are still stored in the input buffer. If hardware flow control is not observed, it is important to
guarantee that the input buffer limit is not exceeded before completion of the last command string. Note: The
command queue does not support backspace characters.
To minimize bus traffic the command words will be kept as short as possible. The units will not respond with prompts
or any command error conditions. Echo will be disabled when RS-485 mode is selected.
30
MatrixPRO 12x - 12 Input Matrix Switcher
Manual # 26-0301000-00 / Revision C
Advertisement
Table of Contents
