Display | 3D - Optoma W402 Manual

User Controls

DISPLAY | 3D

3D Format is only
™
supported on 3D
Timing on page
69.
"3D Format" is
™
only supported on
non-HDMI 1.4a 3D
timing.
42
English
3D Mode
Off: Select "Off" to turn off 3D mode.
`
DLP-Link: Select "DLP-Link" to use optimized settings for DLP
`
Link 3D Glasses. (refer to page 15).
VESA 3D: Select "VESA 3D" to use optimized setting for VESA
`
3D Glasses. (refer to page 15).
3D -> 2D
3D: Display 3D signal.
`
L (Left): Display the left frame of 3D content.
`
R (Right): Display the right frame of 3D content.
`
3D Format
Auto: When a 3D identification signal is detected, the 3D for-
`
mat is selected automatically.
SBS: Display 3D signal in "Side-by-Side" format.
`
Top and Bottom: Display 3D signal in "Top and Bottom" format.
`
Frame Sequential: Display 3D signal in "Frame Sequential"
`
format.
3D Sync. Invert
Press the "On" to invert left and right frame contents.
`
Press the "Off" for default frame contents.
`
Exit
Choose "Exit" to exit the menu.