Table of Contents
Advertisement
USING THE PROJECTOR
‡
H. Position: Adjust the horizontal positioning of the image.
‡
V. Position: Adjust the vertical positioning of the image.
Exit: Exit the "Signal" menu.
‡
Notee:
Signal can only be adjusted for RGB/Component input sources.
Brightness Mode (Lamp base data)
Adjust the brightness mode settings for lamp-based projectors.
‡
Bright: Choose "Bright" to increase the brightness.
‡
Eco.: Choose "Eco." to dim the projector lamp which will lower power consumption and extend the
lamp life.
‡
Dynamic: Choose "Dynamic" to dim the lamp power which will be based on brightness level of the
content and adjust lamp power consumption between 100% and 30% dynamically. The lamp life will
be extended.
‡
Eco+: When Eco+ mode is activated, the brightness level of the content is automatically detected to
significantly reduced lamp power consumption (up to 70%) during periods of inactivity.
Reset
Return the factory default settings for color settings.
Display 3D menu
3D Mode
Use this option to disable the 3D function or select the appropriate the 3D function.
Off: Select "Off" to turn off 3D mode.
‡
On: Select to use optimized settings for DLP 3D Glasses.
‡
‡
IR: Select "IR" to use optimized setting for IR 3D Glasses.
3D → 2D
Use this option to specify how the 3D content should appear on the screen.
‡
3De: Display 3D signal.
‡
L (Left)e: Display the left frame of 3D content.
‡
R (Right)e: Display the right frame of 3D content.
3D Format
Use this option to select the appropriate 3D format content.
‡
Auto: When a 3D identification signal is detected, the 3D format is selected automatically.
‡
SBS: Display 3D signal in "Side-by-Side" format.
‡
Top and Bottom: Display 3D signal in "Top and Bottom" format.
‡
Frame Sequential: Display 3D signal in "Frame Sequential" format.
3D Sync Invert
Use this option to enable/disable the 3D sync invert function.
39
English
Advertisement
Table of Contents
