Table of Contents
Advertisement
Pass-code default
™
value is "1234" (first
time).
Change Password
First time:
`
1.
Press "Enter" key to set the password.
2.
The password has to be 4 digits.
3.
Use number button on the remote or on-screen numeric key-
pad to enter your new password and then press "Enter" key to
confirm your password.
Change Password:
`
(If your remote does not have a number keypad, please use
the up/down arrows to change each digit of the password,
then press enter to confirm)
1.
Press "Enter" to input old password.
2.
Use number button
rent password and then press "Enter" to confirm.
3.
Enter new password (4 digits in length) using the number but-
tons on the remote, then press "Enter" to confirm.
4.
Enter new password again and press "Enter" to confirm.
If the incorrect password is entered 3 times, the projector will
`
automatically shut down.
If you have forgotten your password, please contact your local
`
office for support.
User Controls
or on-screen numeric keypad to enter cur-
47
English
Advertisement
Table of Contents
