Table of Contents
Advertisement
Image has slanted sides:
If possible, reposition the projector so that it is centered on the
`
screen and below the bottom of the screen.
Use "Display-->V Keystone" from the OSD to make an adjust-
`
ment.
Image is reversed
Select "Setup-->Projection" from the OSD and adjust the pro-
`
jection direction.
Blurry double image
Press "3D Format" button and switch to "Off" to avoid normal
`
2D image is blurry double image.
Two images, side-by-side format
Press "3D Format" button and switch to "SBS" for input signal
`
is HDMI 1.3 2D 1080i side-by-side.
Image does not display in 3D
Check if the battery of 3D glasses is drained.
`
Check if the 3D glasses is turned on.
`
When the input signal is HDMI 1.3 2D (1080i side-by-side
`
half), press "3D Format" button and switch to "SBS".
Appendices
61
English
Advertisement
Table of Contents
