Glass Door Installation - Superior Fireplaces WRT6036RH Assembly, Installation And Operation Instructions

OPTIONAL GAS LINE INSTALLATION
If you wish to install an unvented (vent-free)
gas log set, only unvented gas log sets which
have been found to comply with the standard
for unvented room heaters, ANSI Z21.11.2 are
to be installed in this fireplace.
WARNING: If the fireplace
has been used for wood burning,
the firebox and chimney must be
cleaned of soot, creosote and
ashes be a qualified chimney
cleaner. Creosote will ignite if
heavily heated.
DOOR FRAME MODELS
BDMO36E/G/C, BDMO42E/G/C AND
BDMO50E/G/C
Installation
1. Remove screws from smoke shelf (see
Figure 29).
2. Mount top door frame and secure with
screws provided (see Figure 29).
3. Place bottom door frame on top of ash lip
at front of fireplace (see Figure 30).
4. Secure bottom door frame to brick with
two hex screws provided as shown in
Figure 30 using a 7/16" open end or
adjustable wrench.
Figure 29 - Installing Top Door Frame
126595-01A
Continued

GLASS DOOR INSTALLATION

Top Door
Frame
Smoke
Shelf
www.SuperiorFireplaces.US.com
WARNING: When using a
decorative vented gas log, the
damper must be removed or
permanently locked in the fully
open position and the glass doors
must be in the fully open position.
Ash Lip
Bottom
Door
Frame
Ash Lip
Figure 30 - Installing Bottom Door Frame
WARNING: Discontinue use of the
appliance immediately if doors are
damaged and contact a qualified
installer for repair. Only doors certi-
fied with the appliance shall be used.
WARNING: Do not slam or
strike doors. Damage can result
in a hazardous condition.
Hex
Screw
17