NETGEAR WGR614 v6 Reference Manual page 30

Reference Manual for the 54 Mbps Wireless Router WGR614 v6
Follow the instructions on the screen to enable the wireless feature.
c.
Figure 3-6: Enable the wireless feature
Enable your wireless network, click Next to proceed, then click Done to finish. If you
d.
have trouble connecting to the Internet, see
basic problems.
Note: The Smart Wizard configuration assistant only appears when the router is in its
factory default state. After you configure the wireless router, it will not appear again. You
can always connect to the router to change its settings. To do so, open a browser such as
Internet Explorer and go to http://www.routerlogin.net. Then, when prompted, enter
admin as the user name and password for the password, both in lower case letters.
You are now connected to the Internet and the wireless feature of the wireless router is enabled!
Next, configure your wireless computer.
3-6
"Troubleshooting Tips" on page 3-8
July 2004 202-10036-01
Connecting the Router to the Internet
to correct