NETGEAR WGR614 v6 Reference Manual page 38

Reference Manual for the 54 Mbps Wireless Router WGR614 v6
For security reasons, the wireless router has its own user name and password. When prompted,
2.
enter for the router user name and
admin
case letters.
Click Basic Settings on the Setup menu.
3.
If your Internet connection does not require a login, click No at the top of the Basic Settings
4.
menu and fill in the settings according to the instructions below. If your Internet connection
does require a login, click Yes, and skip to step 5.
Enter your Account Name (may also be called Host Name) and Domain Name.
a.
These parameters may be necessary to access your ISP's services such as mail or news
servers.
Internet IP Address:
b.
If your ISP has assigned you a permanent, fixed (static) IP address for your computer,
select "Use static IP address". Enter the IP address that your ISP assigned. Also enter the
netmask and the Gateway IP address. The Gateway is the ISP's router to which your router
will connect.
Domain Name Server (DNS) Address:
c.
If you know that your ISP does not automatically transmit DNS addresses to the router
during login, select "Use these DNS servers" and enter the IP address of your ISP's
Primary DNS Server. If a Secondary DNS Server address is available, enter it also.
Note: If you enter an address here, restart the computers on your network so that these
settings take effect.
Router's MAC Address:
d.
This section determines the Ethernet MAC address that will be used by the router on the
Internet port. Some ISPs will register the Ethernet MAC address of the network interface
card in your computer when your account is first opened. They will then only accept
traffic from the MAC address of that computer. This feature allows your router to
masquerade as that computer by "cloning" its MAC address.
To change the MAC address, select "Use this Computer's MAC address." The router
will then capture and use the MAC address of the computer that you are now using. You
must be using the one computer that is allowed by the ISP. Or, select "Use this MAC
address" and type it in here.
Click Apply to save your settings.
e.
If your Internet connection does require a login, fill in the settings according to the instructions
5.
below. Select Yes if you normally must launch a login program such as Enternet or WinPOET
in order to access the Internet.
3-14
for the router password, both in lower
password
July 2004 202-10036-01
Connecting the Router to the Internet