Introducing The Fvx538; The Router's Front Panel - NETGEAR FVX538v1 - ProSafe VPN Firewall Dual WAN Planning Manual

This chapter introduces the FVX538 ProSafe VPN Firewall Router.

The Router's Front Panel

The FVX538 ProSafe VPN Firewall Router front panel shown below contains the port
connections, status LEDs, and the factory defaults reset button.
ProSafe VPN Firewall
Power Test
LED LED
Figure 1-1: FVX538 Front Panel
You can use the LEDs to verify various conditions.
front panel of the router and its operation.
Table 1-1. Object Descriptions
Object Activity
Power LED On (Green)
Off
Test LED On (Amber)
Blinking (Amber)
Off

Introducing the FVX538

Network Planning Guide for ProSafe VPN Firewall Router FVX538
1
Link/Act 100 Link/Act 100
Power
5
Test
Active Active
WAN1 WAN2
WAN1 Port WAN2 Port
and LEDs and LEDs
Description
Power is supplied to the router.
Power is not supplied to the router.
Test mode: The system is initializing or the initialization has failed.
Writing to Flash memory (during upgrading or resetting to defaults).
The system has booted successfully.
October 2004
Introducing the FVX538
Link/Act 100
4
Link/Act
8
DMZ
LAN
LAN Ports Gigabit Port
and LEDs
DMZ Port
and LEDs
Table 1-1 lists and describes each object on the
Chapter 1
MODEL
Gigabit
Speed
CONSOLE
Defaults
Factory
and LEDs Defaults
Button
Console
Port
FVX538
Factory
1-1