Charging The Battery; Battery Charging Indications - Motorola MTP8550Ex Feature User Manual

Hide thumbs Also See for MTP8550Ex:
Table of Contents

Advertisement

MN002041A01-AH
Chapter 2: Getting Started
2.2.6

Charging the Battery

You can charge a battery separately or attached to a radio.
Charging a battery attached to a radio must be done with the radio turned off. The battery charges
faster when the radio is turned off.
IMPORTANT:
Use only Motorola Solutions approved-chargers which provide optimal performance. Using
other chargers invalidates the warranty and may fail to fully charge, reducing the life of the
battery.
Always charge your IMPRES battery with an IMPRES charger for optimized battery life.
IMPRES batteries charged exclusively with IMPRES chargers receive a 6-month capacity
warranty extension over the standard Motorola Solutions Premium battery warranty duration.
Do not charge the battery in a hazardous area.
Do not connect a radio without a battery to the charger.
Procedure:
1 Connect the charger to an appropriate power source, according to the specification of the
charger.
2 Perform one of the following actions:
Travel chargers and car chargers – connect the charger to the radio with the battery
attached. Ensure that the charger is firmly connected to the radio and that the radio display is
indicating that charging is in progress.
Car chargers – connect the charger to the radio with the battery attached. Ensure that the
charger is firmly connected to the radio and that the radio display is indicating that charging is
in progress.
3 Insert the battery or the radio with the battery attached into the appropriate socket. The LED on
the charger indicates that the charging is in progress.
NOTICE: If a multi-unit charger LED indicates an error (blinking red light) when radio is
inserted and being charged with the multi-unit charger (MUC), re-insert the radio. If the
light is still red after several reconnections to MUC, the battery may be damaged or
reached its end of life.
Postrequisites: The battery may heat up during charging. After charging, make sure that the battery
and the radio are within the operating temperature range before using the radio.
2.2.7

Battery Charging Indications

When the radio is charging, it displays the Charger Mode screen. The screen displays an appropriate
Battery Charge Progress icon and charging progress expressed in percentage.
NOTICE:
To easily identify the charging status, check the Battery Charging LED Indicator. See
Indications on page
30
168.
LED

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents