Table of Contents
Advertisement
Notes
• Audio output from the HDMI terminal is available only on VPL-EW578/EW575/EW455/EW435/
EX575/EX455/EX435.
• Use HDMI-compatible equipment which has the HDMI Logo.
• Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony products are
recommended.)
• The HDMI terminal of this projector is not compatible with DSD (Direct Stream Digital) Signal
or CEC (Consumer Electronics Control) Signal.
Connecting a HDBaseT
For connecting the computer, video equipment, and network equipment via the HDBaseT
transmitter.
Connecting to the computer
INPUT E
Computer
Connecting to the video equipment
INPUT E
Video equipment
Notes for connecting this unit and the HDBaseT transmitter
• Ask a professional or Sony dealer to perform wiring. If wiring is not correct, the transmission
characteristics of the cable will not be achieved, and image or sound may break up or you may
experience unstable performance.
• Connect the cable directly to the HDBaseT transmitter without going through a hub or router.
• Use cables that meet the following conditions.
-CAT5e or higher
TM
equipment
HDMI output
terminal
HDMI cable (not supplied)
HDMI output
terminal
HDMI cable (not supplied)
LAN cable: STP type (CAT5e or
higher, straight, not supplied)
HDBaseT transmitter (not supplied)
LAN cable: STP type (CAT5e or
higher, straight, not supplied)
HDBaseT transmitter (not supplied)
Connecting the Projector
13
Advertisement
Table of Contents
