Table of Contents
Advertisement
b) For AP Mode
Refer to the network information on the
projected screen of the projector that you
want the computer connect to, and input
the SSID and the Connection CODE. If
"CODE" is "----", "Connection CODE"
is set to "Off." The computer can
connect without inputting "CODE". If
the wireless password is set for the SSID
("Setting the WLAN Network of the
projector" on page 39), the wireless
password input window will be
displayed while the computer is trying to
connect. Input the password to connect.
To prevent information leaks, the
wireless password is not displayed on
the projected screen.
Network Presentation LAN mode
Network Presentation AP mode
Wireless password input window
Notes
• When a projector is connected to a network
via a wireless connection, if the "SSID" is
changed from the factory default, it may not
be found.
• When a projector is connected to a network
via a wired connection, depending on the
network environment, it may not be found.
3
Click "Connect".
When you click the "Connect" button, a
controller will be displayed on the
screen of the computer and the computer
starts projecting an image (page 50). If
another user is projecting an image,
click
to start projecting.
If no users are projecting an image, the
controller appears on the screen and
starts projecting an image.
Notes
• Display related settings (such as your
computer's resolution) change when the
image projection is started.
• If "Input" is set to other than "Network"
(page 16), the image will not start being
projected even after you press the "Connect"
button. If you want to project the image,
select "Network" to change the display
status.
Connection Settings
Item
Item descriptions
IP Address
Input the IP Address.
List the IP addresses of the
projectors on the network
and IP addresses of
projectors connected so far,
as candidates.
SSID
Input SSID.
List the peripheral SSIDs
and SSIDs of projectors
connected to the computer
so far, as candidates.
Update
Search the network again
button
and update the candidate list
of the projectors.
Using Presentation Function via Network
49
Advertisement
Table of Contents
