Connecting A Hdbaset™ Equipment - Sony VPL-PHZ10 Operating Instructions Manual

INPUT B/INPUT C
For connecting video equipment with an HDMI output terminal.
Video equipment
Notes
• Use HDMI-compatible equipment which has the HDMI Logo.
• Use a high speed HDMI cable(s) on which the cable type logo is specified. (Sony
products are recommended.)
• The HDMI terminal of this projector is not compatible with DSD (Direct Stream
Digital) Signal or CEC (Consumer Electronics Control) Signal.
Connecting a HDBaseT™ equipment
For connecting the computer, video equipment, and network equipment via the
HDBaseT transmitter.
Connecting to the computer
INPUT D
Computer
HDMI cable (not supplied)
HDMI output
terminal
HDMI output
terminal
HDMI cable (not supplied)
LAN cable: STP type (CAT5e or
higher, straight, not supplied)
HDBaseT transmitter
Connecting the Projector
13