Cd Programmed Play - Jensen CD-60 User Manual

1. In CD stop mode, press the PROG button once, PROG
number appears. PROG icon and Track number "00" start
flashing in the display.
2. Press SEARCH/SKIP
track.
3. When the desired track is displayed, press the PROG
button to register. The PROG number changes to 02. Track number returns to
00 and flashes together with PROG.
4. Repeat above steps 2 and 3 to program more tracks. Up to 20 tracks can be
programmed into the memory.
5. Press PLAY/PAUSE
6. To erase the program, in STOP mode simply press the STOP button.
This player incorporates an electronic anti-skip circuit to prevent interruption of the
sound output when the unit is subjected to shock, vibration or rolling during disc
playback. The anti-shock system will automatically activate when a disc is playing, the
ESP indicator will appear in the display and flashing.
Once anti-skip buffer is full, it will give you approximately 60 seconds of protection
against interruption of sound output. If the player is subjected to shock or rolling for
longer than the buffer memory, some interruption of sound output will occur. This is
normal and to be expected and the sound will resume once the player has stabilized
from the shock or rolling disturbance.
Note: The anti-skip function provides for continuous sound output when the unit is
subjected to shock or vibration. It will not compensate for errors arising from the
use of defective, scratched or dirty discs.
TUNING THE FM RADIO
1.
Slide the CD/FM Mode selector to the FM position. The FM radio defaults to the
high end of the FM band, so you may hear static from the earbuds.
2.
Press the TUNE+ or TUNE- Button to begin scanning the FM band for a desired
radio station to listen to.
3.
Pressing TUNE+ will scan up the FM band and pressing TUNE- will scan down the
FM band. Once a strong FM station is received, the scanning will stop and play that
station.
4.
If the station the radio stops on is not one you want to listen to, Press the TUNE+
or TUNE- Button again until the station you want to listen to is received. You may
need to press the TUNE+ or TUNE- Button multiple times to get to the station you
want to listen to if it's located in the middle of the FM band.
5.
Rotate the VOLUME knob to adjust the volume control to the desired level.
6.
Turn off the FM radio by slide the CD/FM Mode selector to the CD (power off)
position after listening.
NOTE: When you turn off the power, the FM radio will reset back to the highest station

CD PROGRAMMED PLAY

/
button to start the programmed play.
ANTI-SKIP PROTECTION
LISTENING TO THE FM SCANNING RADIO
button to select the desired
E- 9