Transportation
Preparatory work
1.
2.
3.
4.
5.
6.
Installing transportation protection devices
1.
2.
Before switching on the appliance:
– Always remove the transportation protection devices!
²
– To prevent unused detergent from flowing into the outlet
Turn off the tap.
Release the water pressure in the supply hose. Maintenance
– Filter in the water inlet hose ~ Page 46
Drain any residual detergent solution. Maintenance – Drain
pump blocked ~ Page 44
Isolate the washing machine from the power supply.
Remove the hoses.
Drain dispensers. ~ Page 42
Remove covers and keep in a safe place.
If required, use a screwdriver.
Insert all 4 sleeves.
Clamp mains cable on the holders. Insert and tighten the
bolts.
~ Page 57
during the next wash cycle: Pour 1 litre of water into
dispenser
and start the Drain programme.
u v
65