Bosch WAY28740IT Instruction Manual And Installation Instructions
  1. Manuals
  2. Brands
  3. Bosch Manuals
  4. Washer
  5. WAY28740IT
  6. Instruction manual and installation instructions

Bosch WAY28740IT Instruction Manual And Installation Instructions

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Washing machine
WAY28740IT
Instruction Manual and Installation Instructions
en

Advertisement

Table of Contents
loading

Related Manuals for Bosch WAY28740IT

Summary of Contents for Bosch WAY28740IT

  • Page 1 Washing machine WAY28740IT Instruction Manual and Installation Instructions...
  • Page 2 Please take a couple of minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands of the Bosch brand, each washing machine, which leaves our factory, is inspected thoroughly to ensure that it functions properly and is in perfect condition.

  • Page 3: Table Of Contents

    Contents e n I n s t r u c t i o n M a n u a l a n d I n s t a l l a t i o n I n s t r u c t i o n s Before washing Intended use Ø...

  • Page 4: Intended Use

    Intended use B e f o r e w a s h i n g For use in the household only. Ø The washing machine is suitable for washing machine- Ø washable textiles and hand-washable wool in wash liquor. The washing machine is suitable to be operated with cold Ø...

  • Page 5: Safety Instructions

    Safety instructions Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. Warning! Risk to children! –...
  • Page 6 Prevent children from touching the hot washing machine door. – Detergents and care products may cause intoxication if consumed or eye and skin irritation if touched. Keep detergents and care products out of the reach of children. Warning! Risk of explosion! Items of washing pretreated with solvent detergents, e.g.
  • Page 7 Caution! Danger when reaching into/gripping the rotating drum! If you reach into the rotating drum, you may injure your hands. Do not grip the rotating drum. Wait until the drum stops rotating. Caution! Risk of coming into contact with liquid detergents/ care products! If the detergent drawer is opened while the washing machine is running, detergent/care product may spray...

  • Page 8: Protection Of The Environment

    Protection of the environment Packaging/Old appliance Dispose of packaging in an environmentally friendly manner. This appliance has been identified in accordance with the European Directive 2002/96/EG on Waste Electrical and Electronic Equipment (WEEE). The Directive specifies the framework for an EU-wide valid return and recycling of waste appliances.

  • Page 9: Getting To Know Your Appliance

    Getting to know your appliance...

  • Page 10: Detergent Drawer

    Detergent drawer Dispenser I Detergent for prewash Softener, starch. Do not exceed the maximum load. Dispenser Dispenser II Detergent for main wash, water softener, bleach, stain remover Dispenser A for dosing liquid detergent (not for all models) For models with insert for liquid detergent: The detergent drawer features an insert which is used as a dosing aid for liquid detergent.

  • Page 11: Operating Elements/Display Elements

    Operating elements/Display elements ² All buttons are sensitive, they only need to be touched gently. Switch on and off the appliance. Press Start wash programme. main switch button. Avvio/Pausa (Start/Pause) button to start, interrupt and cancel the Select a programme. Rotating the in programme (e.g.

  • Page 12: The Main Points In Brief

    The main points in brief Insert mains plug. Open the washing To switch on, press Select the Turn the tap on. machine door. programme, e.g. button. Cottons. Dosage: 30% ¼ Please load laundry: max. 8kg Sort the washing. Insert the washing. Do not exceed maximum load.

  • Page 13: Before Each Washing

    Before each washing O p e r a t i n g t h e a p p l i a n c e – Install and connect washing machine properly. Refer ² to ~ Page 46 – Before the 1st wash, wash once without any washing. ~ Page 59 1.
  • Page 14 Otherwise, the load display may malfunction. Press the button. The appliance is switched on. The Bosch logo is indicated on the display panel and all programme indicator lamps are lit. Then always the Cotone (Cottons) programme preset at the factory is displayed.
  • Page 15 After switching on the appliance, after opening and closing the washing machine door as well as after starting the programme, the drum is lit. The light goes out automatically. Select a programme. You can use the saved programme or select another programme, Programme overview, refer to ~ Page 24, or select other programmes (see altro (more) programmes) and choose one programme as follows:...
  • Page 16 ~ Page 34 – Do not load washing until the main menu for the saved programme is displayed after the Bosch logo. – The load bar progresses as the washing machine is loaded. If the max. load is exceeded, the bar flashes. Do not exceed indicated max.
  • Page 17 5. Changing the settings of the selected programme Take care not to trap any items of clothing between the loading ² door and rubber seal. Close the door. × × × × 1400 2:31 °C Ö Ö Ö The main menu for the selected programme is indicated again on the display panel.
  • Page 18 Ø TurboPerfect for a shorter wash time with a comparable washing effect to the standard programme. Observe maximum load. ~ Page 24 When selected, the display lamp is lit. Sistema antimacchia (Automatic stain treatment) . Ø Overview of all stains Page 31 Do not let stains dry.
  • Page 19 6. Starting the programme Select Avvio/Pausa (Start/Pause). The indicator light Ø is on.

  • Page 20: Washing

    Washing During the wash cycle the programme progress is indicated by a bar on the display panel. The bar progresses in the course of the wash cycle and provides information about the current programme progress. The arrows are switched on and off according to the programme progress.
  • Page 21 During washing Ø Childlock To prevent the set functions of the washing machine from being accidentally changed, the childproof lock can be activated. Activate/deactivate: press Fine fra (Finished in) for approx. 5 seconds. Childlock has been activated Display panel goes back to the Main menu after approx. 3 seconds.
  • Page 22 Ø Cancelling the programme For programmes at high temperature: 1. Select Avvio/Pausa (Start/Pause). 2. Cool down washing: select Rinse/Freshen Up (see altro (more) programmes). 3. Select Avvio/Pausa (Start/Pause). For programmes at low temperature: 1. Select Avvio/Pausa (Start/Pause). 2. Select Spin * or Drain *. (* see altro (more) programmes) 3.

  • Page 23: After Washing

    After washing Open washing machine door and remove washing.. Remove the washing. ¼ Switch off the device. – Do not leave any items of washing in the drum. In the next ² wash they may shrink or discolour something else. –...

  • Page 24: Programme Overview

    Programme overview The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/information max. load Name of the programme Brief explanation of the programme and selectable temperature as °C for which textiles it is suitable. selectable spin speeds in rpm, the max.
  • Page 25 The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/information max. 2 kg Lana (Wool) Hand or machine-washable wool or rich- cold – 30 – 40 °C wool textiles. 0 ... 800 rpm Especially gentle wash programme to prevent shrinkage, longer programme Á...
  • Page 26 The presettings of the programmes are highlighted in bold. Programme/Type of washing Options/information Sport/Fitness (Sports Wash) max. 2 kg Textiles made of microfibres for sport and cold – 30 – 40 °C leisure time. 0 ... 800 rpm ² . The laundry must not be treated with ¦...
  • Page 27 see more programmes The presettings of the pro- grammes are highlighted in bold. Programme/Type of washing Options/information max. 3,5 kg Towels Hard-wearing, heat-resistant towels made cold - 60 – 90 °C of cotton. 0 ... 1200 ... 1600 rpm especially soft towels ¦...
  • Page 28 Memory 1 and 2 The programme and all settings are permanently stored under Memory 1 and Memory 2. Saving: Select Memory 1 or 2 programme. If a programme has not yet been selected for this memory programme, select programme according to the instructions on the display panel.

  • Page 29: Programme Settings/Options

    Programme settings/options Depending on the programme, you can use the programme options to adjust the washing process even more efficiently to your items of washing. – Are active without acknowledgement. ² – Not retained after appliance is switched off. – Can be selected or deselected or changed depending on the programme progress.
  • Page 30 Press Opzioni (Options) button to Notes select: For heavily soiled washing. Pre-wash on – off Pour detergent into dispensers I and II. Reduces creasing by special spin sequence followed Less Ironing on – off by fluffing and reduced spin speed. ²...

  • Page 31: Automatic Stain Treatment

    Automatic stain treatment General information about stains A total of 16 different stains can be selected. The washing machine adjusts the washing temperature, drum movement and soaking time specific to the type of stain. Hot or cold water, gentle or intensive washing control and long or short soaking provide the wash programme with a special sequence for each type of stain.

  • Page 32: Consumption Values

    Consumption values Programme Load Energy Water *** Programme consumption *** duration *** Cotone (Cottons) 30 °C * 8 kg 0,38 kWh 57 l 2:21 h Cotone (Cottons) 40 °C * 8 kg 0,97 kWh 57 l 2:31 h Cotone (Cottons) 60 °C * 8 kg 1,31 kWh 57 l...

  • Page 33: Appliance Settings

    Appliance settings By pressing the Impostazioni 3 sec. (Settings 3 sec.) buttons, appliance settings can be changed, e.g. button signal. Simultaneously hold down Impostazioni 3 sec. (Settings 3 sec.) buttons for approx. 3 seconds: language end signal  button signal Ö...

  • Page 34: Sensors - Your Washing Machine Is So Intelligent

    Sensors – Your washing machine is so intelligent Load adjust Depending on the type of textile and load, the load adjust optimally adjusts the water consumption in each programme. Aqua-Sensor depending on model During the rinse cycle the Aqua sensor checks the degree of turbidity (turbidity is caused by dirt and detergent residue) of the rinsing water.

  • Page 35: Care And Maintenance

    Care and maintenance C l e a n i n g a n d m a i n t e n a n c e Warning! Danger of death from electric shock! Danger of death if live parts are touched. Switch off the appliance.
  • Page 36 Descaling Not required if detergent dosed correctly. However, if this does occur, follow the instructions of the descaling agent manufacturer. Suitable descalers can be purchased on our website or from customer service. ~ Page 43 Cleaning the detergent drawer If it contains detergent or fabric softener residue: Pull out, depress insert, take out drawer all the way.
  • Page 37 Take the drainage hose out of the holder. Remove sealing cap, allow detergent solution to flow out. Have a suitable container ready. Push up the closing cap and place the drain hose back in its holder. Note: Residual water may run out. Carefully unscrew the pump cover.
  • Page 38 Filter blocked in water inlet hose First, release water pressure in the supply hose: Turn off the tap! Select any programme (except Spin/Drain). Select Avvio/Pausa (Start/Pause). Leave programme for approx. 40 seconds. Press the button. Appliance is switched off. Pull out the mains plug! Clean the filter: Disconnect the hose from the water tap.

  • Page 39: Emergency Lock Release, E.g. If Power Failure Occurs

    Emergency lock release, e.g. if power failure occurs The programme continues running when the power supply is restored. If the washing is still to be removed, the door can be opened as described below: Warning! Danger of scalding! Wash liquor and washing may be hot. If touched, there is a risk of scalding.

  • Page 40: Information On The Display Panel

    Information on the display panel Display Cause/Remedy The door cannot be – Washing may be caught. Please open and close washing ma- locked, please open chine door again and select Avvio/Pausa (Start/Pause). the door again, then – If required, shut washing machine door or remove washing and close it and select shut again.

  • Page 41: Faults, What To Do

    Faults, what to do? Faults Cause/Remedy Water is running out. – Correctly attach/replace drainage hose. – Tighten screw-fitting on the supply hose. Water not flowing in. – Avvio/Pausa (Start/Pause) not selected? Detergent not dis- – Tap not open? pensed. – Filter blocked? Clean the filter. ~ Page 38 –...
  • Page 42 Faults Cause/Remedy Display panel/indi- – Power failure? cator lights do not – Fuse tripped? Switch on/replace fuse. function while the – If the fault occurs repeatedly, call customer service. ~ Page 43 appliance is running. The programme – Not a fault – unbalanced load detection system adjusts imbal- takes longer than ance by repeatedly distributing the washing.

  • Page 43: Customer Service

    Customer service If you cannot rectify the fault yourself, Faults, what to do?~ Page 41, please contact our customer service. We will always finds a suitable solution to avoid unnecessary visits by technicians. Please give customer service the product number (E-Nr.) and the production number (FD) of the appliance.

  • Page 44: Standard Accessories

    Standard accessories I n s t a l l i n g t h e a p p l i a n c e Also required for connection of the water drainage hose to a siphon: 1 hose clip Ø 24–40 mm (DIY store) is also required for connection to a siphon.
  • Page 45 Hose and cable lengths If the hose holders are used, the possible hose lengths are ² reduced! Available from dealer/customer service: Extension for Aqua-Stop or cold water inlet hose Ø (approx. 2.50 m). Order no. WMZ2380, WZ10130, CZ11350, Z7070X0 Longer supply hose (approx. 2.20 m), for standard model. Ø...

  • Page 46: Installation

    Installation Humidity in the drum is caused by the final inspection. ² Secure installation Warning! Risk of injury! – The washing machine is heavy – caution: take care when lifting it. – If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and cause injuries.
  • Page 47 – If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and the washing machine may be damaged. Donot lift the washing machine by its projecting parts. – In addition to the safety information listed here, the local ²...
  • Page 48 Caution! Washing machine may be damaged! – Frozen hoses may tear/burst. Do not install the washing machine in an area where there is a risk of frost or outdoors. – If the washing machine is raised by protruding components (e.g. washing machine door), the components may break off and the washing machine may be damaged.
  • Page 49 Installing the appliance on a base or on a wooden joist ceiling Warning! Washing machine may be damaged!! The washing machine may wander during the spin cycle and topple/fall off the base. Always secure the washing machine feet with fixing brackets. Holding brackets: order no.

  • Page 50: Remove Transportation Protection Devices

    Remove transportation protection devices Caution! Washing machine may be damaged! Transit bolts which have not been removed may damage e.g. the drum while the washing machine is running. Before using the appliance for the first time, remove the 4 transportation protection devices completely and keep in a safe place.
  • Page 51 Take hoses out of the elbow and remove elbow. Loosen and remove all 4 transportation lock screws. Take the power cord out of the holders. Remove sleeves. Prepare/separate cover. Insert covers. Lock covers firmly by pressing on the locking hook. ²...

  • Page 52: Connecting The Water

    Connecting the water Warning! Danger of death from electric shock! Danger of death if live parts are touched. Do not immerse Aqua-Stop safety device in water (contains an electric valve). – To prevent leakage or water damage, follow the instructions ²...
  • Page 53 to the tap (¾" = 26.4 mm): Aqua-Stop and Aqua-Secure Standard on the appliance: for Standard and Aqua-Secure models Carefully turn on the tap and check that the connection points are not leaking. Screw connection is under water pipe pressure. ²...
  • Page 54 Caution! The appliance may be damaged. If the end of the drainage hose is immersed in the drained water, water may be drawn back into the appliance! – The plug must not be in the plug hole. – When the water is being pumped out of the washing machine, check that the water drains away quickly enough.
  • Page 55 Drainage into a plastic pipe with rubber sleeve or into a gully: Warning! Water damage possible! If the drainage hose slips off the plastic pipe due to high water pressure when draining the washing machine, leaking water may cause damage. Secure the drainage hose to prevent it from slipping out of the sink.

  • Page 56: Alignment

    Alignment Loosen lock nut in a clockwise direction with a wrench. Check alignment of the washing machine with a spirit level and, if required, correct. Adjust the height by rotating the foot. All four feet must be firmly on the floor. ²...

  • Page 57: Electrical Connection

    Electrical connection Electrical safety Warning! Danger of death from electric shock! Danger of death if live parts are touched. – Never pull out the mains plug by tugging the power cord. – Insert/pull out the mains plug with dry hands only. –...
  • Page 58 – If a residual-current-operated circuit breaker is used, use only a type which features this symbol: Only this symbol guarantees compliance with currently valid regulations. – The mains plug must be accessible at all times.

  • Page 59: Before The 1St Washing

    Before the 1st washing The washing machine was inspected thoroughly before leaving the factory. To remove any water left over from testing procedures, the first washing cycle should be carried out without laundry in the machine. The washing machine must have been installed and connected ²...

  • Page 60: Transportation, E.g. If Moving House

    Transportation, e.g. if moving house Preparatory work Turn off the tap. Release the water pressure in the supply hose. Maintenance – Filter in the water inlet hose ~ Page 38 Drain any residual detergent solution. Maintenance – Drain pump blocked ~ Page 36 Isolate the washing machine from the power supply.

  • Page 61: Index

    Index Alignment, 56 Automatic stain treatment, 11, 18, 29, 31 Aqua-Sensor, 34 Care, 35 the filter, 38 Drum, 35 the siphon, 37 Machine housing/Control Connecting the water, 52 panel, 35 Water drainage, 53 Childlock, 21 Water supply, 52 Cleaning Consumption values, 32 the detergent drawer, 36 Customer service, 43 Descaling, 36...
  • Page 62 Packaging, 8 Programme selector, 11 Pre-wash, 30 Programme sequence steps, 20 Programme Programme setting, 17, 18 Changing the programme, 21 Programme settings, 29 Terminating the Protection of the programme, 22 environment, 8 Programme overview, 24 Quick-reference instructions, 12 Ready in, 11, 17, 29 Rinse Plus, 30 Remove the washing, 23 Rinse Hold, 22, 30...
  • Page 64 Calls from a BT landline will be charged at up to 3 pence per minute. 01450 2655 Please find the contact data of all countries in the enclosed customer service list. Robert Bosch, Hausgeräte GmbH Carl-Wery-Straße 34 81739 München DEUTSCHLAND 9000723762...

Table of Contents