Table of Contents
Advertisement
Ø
Ø
Ø
Ø
Ø
Ø
In daily use
Ø
Ø
²
The selection (on/off) of i-DOS
each programme until the next change occurs, even if the
machine is switched off.
Ø
34
Use only self-flowing liquid products and gels which the
manufacturer recommends adding to a detergent drawer.
Do not mix different liquid detergents. If changing the liquid
detergent (type, manufacturer, ...), empty the dispenser
completely. ~ Page 42
Do not use any solvent-based, corrosive or gas-emitting
products (e.g. liquid beach).
Do not mix detergent and softener.
Do not use any superimposed or highly thickened products.
To prevent product from drying, do not leave the fill cover
open for a long time.
Illuminated displays on the drawer handle
– Display is lit if intelligent dosage is selected for the
dispenser. In the case of the combined container
/
the indicator light is lit for the stored container
i
w
content (
for softener/
i
– Display flashes if the fill level for the container is below
the minimum when intelligent dosage has been selected.
– Display flashes briefly when drawer has been inserted
correctly.
Selecting and deselecting intelligent dosage/adjusting
dosage strength
The intelligent dosage of detergent and softener is selected
in the factory for all permitted programmes. Refer to
~ Page 22 The dosage strength for detergent has been
preset to light (lightly soiled washing) and for softener to
medium (normally soft washing) and can be individually
changed for each programme. Refer to ~ Page 17
In addition to intelligent dosage, washing additives (e.g. stain
remover) can be added manually via dispenser
~ Page 37
Reloading detergent/softener
The flashing of the associated illuminated display when
intelligent dosage is selected and a corresponding message
on the display panel indicate that the level is below the
minimum. There are still enough contents for approx.
3 washes.
for detergent). ~ Page 39
w
/
and i-DOS
M
w
w
.
u v
is retained for
Advertisement
Table of Contents
