Reading Out Information - Daikin Altherma EBLQ05CAV3 User Reference Manual

If... is displayed
Mon 15:20
Holiday
Until 16 Feb 2013
Actual temp. 12.0°C
To configure the holiday (when you stay at home)
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [2.2]: > Holiday > Holiday mode.
2 Select Home.
3 Configure the holiday mode settings (when you stay at home).
4 Activate the holiday mode.
Possible holiday mode settings (when you stay at home)
Setting
From and Until First and last day of your holiday.
Use day Day schedule used during your holiday.
schedule
Example: Saturday
INFORMATION
Switch to Adv. end user if you want to change the Use day
schedule setting.
To configure the holiday (when you go away)
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [2.2]: > Holiday > Holiday mode.
2 Select Leave.
3 Configure the holiday mode settings (when you go away).
4 Activate the holiday mode.
Possible holiday mode settings (when you go away)
Setting
From and Until First and last day of your holiday.
Operation mode Operation mode used during your holiday.
Heating Set point used during your holiday when the unit
is operating in heating mode.
Cooling Set point used during your holiday when the unit
is operating in cooling mode.
DHW Turn ON or OFF domestic hot water operation
during your holiday.
INFORMATION
You can only change the From and Until settings in the
End user level. For changing the other settings, you have
to switch to Adv. end user level.
To activate or deactivate the holiday mode
Prerequisite: You have configured the holiday.
1 Go to [2.1]: > Holiday > Holiday.
2 Do one of the following:
EBLQ05+07CAV3 + EDLQ05+07CAV3
Daikin Altherma low temperature monobloc
4P405545-1C – 2018.06
Then...
One of the following holiday
modes is activated:
▪ Holiday mode (Away) is
activated, but NOT running
yet.
▪ Holiday mode (Home) is
activated. You cannot see if
the holiday mode is already
running.
Holiday mode (Away) is
activated and running.
Description
Description
▪ To activate, select Yes and press
▪ To deactivate, select No and press
Usage example: You go away during the winter
If you are in the following situation:
▪ In 2 days, you go away for 2 weeks during the winter.
▪ You want to save energy, but prevent your house from freezing.
Then you can do the following:
Prerequisite: You switched the permission level to Advanced end
user.
1 Configure the holiday. Go to [2]:
the following settings:
Setting
Holiday mode
From
Until
Operation mode
Heating
2 Activate the holiday mode.
▪ Go to [2.1]: > Holiday > Holiday.
▪ Select Yes and press
Advantage:
▪ Before and after your holiday, your normal schedule will be used.
▪ During your holiday, you save energy and prevent your house
from freezing.
Usage example: You come home during your holiday
If you are in the following situation:
▪ You configured and activated the holiday mode (Away).
▪ During your holiday, you come home for a few hours and want to
use your normal schedule.
Then you can do the following:
1 Deactivate the holiday mode.
2 When you go away again, activate the holiday mode again.
Advantage:
You do NOT have to change your schedule or holiday configuration.
4.6.4

Reading out information

To read out information
Prerequisite: You switched the permission level to Advanced end
user.
1 Go to [6]: > Information.
Possible read-out information
In menu...
[6.1] Sensor information
[6.2] Energy metering
[6.3] Error handling
[6.4] User permission level
[6.5] Actuators
4 Operation
.
.
> Holiday, and configure
Value
Away
2 February 2014
16 February 2014
Heating
12°C
.
You can read out...
Room, tank or DHW, outside,
and leaving water temperature.
(If applicable)
Produced energy, consumed
electricity, and consumed gas.
Error history and contact/
helpdesk number.
Current user permission level.
Status/mode of each actuator.
Example: Domestic hot water
pump ON/OFF.
User reference guide
15