Operating Instructions - Simpson MegaShot MSV2200 Operator's Manual

NOTE: The pump on this unit is maintenance free and does not require additional oil, or require the
oil to be changed. If there is a problem with the pump, contact our Customer Service Group on www.
power-washer.us as soon as possible.
Risk of bursting. Use a tire pressure gauge to check the tire pressure before each use
and while infl ating tires; see the tire sidewall for the correct tire pressure.
NOTE: Air tanks, compressors, and similar equipment used to infl ate tires can fi ll small tires similar to
these very rapidly. Adjust pressure regulator on air supply to no more than the rating of the tire pres-
sure. Add air in small increments and frequently use the tire gauge to prevent over infl ation.
Compare the illustrations with your unit to familiarize yourself with the location of various controls and
adjustments. Save this manual for future reference.
High Pressure Hose
Chemical Hose
High Pressure Pump
High Pressure Pump: Increases the pressure of the water supply.
Engine: Drives the high pressure pump. Refer to the engine manual for location and operation of
engine controls
High Pressure Hose: Carries the pressurized water from the pump to the gun and spray wand.
Spray Gun: Connects the spray wand to control water fl ow rate, direction, and pressure.
Vario & Quick Connect Spray Wand: Allows the user to quickly change the spray pattern. See next
sections for more details on the specifi c Spray Wand included with your machine.
Chemical Hose: Feeds cleaning agents into the pump to mix with the water under low pressure.
See How to Apply Chemicals / Cleaning Solvents instructions.

OPERATING INSTRUCTIONS

BASIC ELEMENTS OF A PRESSURE WASHER
9
Spray Gun
Spray Wand
Engine