Options And Supplies; Service Notes "Firmware Update" For Pcl Option Installation - Panasonic UF-8100 Service Manual

8 Options and Supplies

8.1.

Service Notes "Firmware Update" for PCL Option Installation

To use PCL (UE-404091) option individually, changing to Type B SC firmware is required. The required
firmware is on the CD included with the option.
Note:
The 8 MB Expansion Board (DA-EM600) must be installed for the printer controllers above to function.
The only time a DA-EM600 is needed is if you are installing the PCL option. There will never be a need
for 2 of these, even if there are other options, such as Fax, added.
Before proceeding, it is important to determine the Final Configuration of your machine in order to correctly
identify the required firmware from the table below. Carefully read and follow the Installation Instructions for
the appropriate option.
The firmware for SC and G3B must be updated in this sequence as a set. Please update the firmware with
the latest version as a set by referring to the following table.
Firmware Version Table
Slot 1 FROM PCB
Ver. 2.1
Standard Firmware
(SC = Type A)
UF-8000AxVxxxxx_xx
SC
UF-7000AxVxxxxx_xx
G3B UF-8K_G3BAxVxxxxx
Not Required
PCL Firmware
(SC = Type B)
UF-8000BxVxxxxx_xx
UF-7000BxVxxxxx_xx
Required
240
UF-7000/8000
UF-7100/8100
←
APR 2007