Napoleon PTSS165E Use And Care Manual page 16

Post Mounting Instructions:
1. Remove all the parts from the packaging.
2. Attach the post to the casting using four 1/4-20 x 1" hex head bolts. Ensure that
the holes on the back side of the post face the same direction as the groove on
the bottom back of the foot casting.
3. Place the spacers provided on the three nutserts that are closest to the front of the
post.
4. Place the platform with the latch to the front onto the three spacers. Attach with the three
1/4-20 x 1 3/4" flat head bolts. Tighten firmly in place.
5. Attach the back post cover with the two #8 screws provided.
6. Once the post is completely assembled, the grill can be mounted:
a. Lock the lid of the grill closed with the latch.
b. Hold the grill by the handle with one hand, place the other hand under the grill in the
centre of the front tapered surface.
c. Place the grill bottom on the platform and slide it forward to engage the tab protruding
from the bottom of the grill. Ensure that the tab is properly engaged.
d. When the dimples on the bottom of the unit line up with the holes on the platform, the
latch is ready to be fastened.
16