Carton Inventory; Hardware Inventory - Chamberlain 3585-100 3/4 HP Owner's Manual

Carton Inventory

Your garage door opener is packaged in two cartons
which contain the motor unit and all parts illustrated
below. Accessories will depend on the model
Motion Detecting
Door Control Panel
Remote Light Control
Model 3585-100 Only
2-Conductor Bell Wire
White & White/Red
Safety Sensor
Bracket (2)
INSTALLATION HARDWARE
Hex Bolt 5/16"-18x7/8" (4)
Hex Screw #8 x 3/8" (2)
Lag Screw 5/16"-9x1-5/8" (2)
Lag Screw 5/16"-18x1-7/8" (2)
Clevis Pin 5/16"x2-3/4" (1)
Clevis Pin 5/16"x1-1/4" (1)
Clevis Pin 5/16"x1" (1)
Nut 5/16"-18 (4)
Lock Washer 5/16" (4)
Screw 6ABx1-1/4" (2)
SECURITY✚ ®
3-Button Remote Control
Model 3585 (1)
Model 3585-100 (2)
Motor Unit w/Light Lenses
Trolley
Belt
Pulley Bracket
SECURITY✚
Model 3585-100 Only
(2) Safety Reversing Sensors
(1 Sending Eye and 1 Receiving Eye)
with 2-Conductor White & White/Black
Bell Wire attached
purchased. If anything is missing, carefully check the
packing material. Parts may be stuck in the foam.
Hardware for installation is also listed below.
Model 3585-100 Only
®
SECURITY✚
3-Button Mini-Remote Control
Belt
Garage Door Monitor
Model 3585-100 Only
One-Piece
Rail
Header Bracket
® Keyless Entry
Self-Threading Screw 1/4"-14x5/8" (2)
Screw 6-32x1" (2)
Insulated Staples (30)
Ring Fastener (3)
Drywall Anchors (2)
Rope
Handle
Rail Grease
Carriage Bolt 1/4"-20x1/2" (2)
Wing Nut 1/4"-20 (2)
5
Remote Control Belt Cap Retainer
Transmitter Visor Clip
Styrofoam
Parking Assist
Model 3585-100 Only
Door Bracket
Curved Door
Arm Section
Safety Labels
and
Literature
Straight Door
Arm Section