Setting The Demonstration Function - Samsung VP-M2100S Owner's Instruction Book

Setting the CAM : Setting the System

Setting the Demonstration Function

Demonstration function will allow you to view all the functions that the CAM supports.
1. Move [POWER/MODE Selector] down to turn on the CAM.
N
The Video Record screen appears.
2. Move [POWER/MODE Selector] down again to select
and press the [OK] button.
N
The system is automatically converted into the selected mode in two seconds even
when the [OK] button is not pressed.
N
The System Settings menu appears.
3. Move the [W/T] button to select <System> and press the [√] button.
4. Move the [W/T] button to select <Demonstration> and press the [√] button.
5. Move the [W/T] button to set the desired setting and press the [OK] button.
N
Off: Cancel the Demonstration function.
N
5 Minutes: Start the Demonstration function in 5 minutes.
N
Play Now: Start the Demonstration function now.
Notes
✤
If you select [œ ] button in the menu, the previous menu appears.
✤
After you finish setting, press the [Record/Stop] button to exit from the menu screen.
✤
If you set the Demonstration function, it operates only in Video Record mode.
System Settings mode
ENGLISH
2
F / 720i
System Settings
00:00:00 / 00:43:41 STBY
3 System Settings System Settings
System
Display Display
Date/Time Date/Time
System
Memory Memory
Language Language English English English
4 Settings : System Settings : System
System
Auto Shut off Auto Shut off
5 Minutes 5 Minutes
Demonstration Off
Start-up Start-up
Video Mode Video Mode
File No. File No. Reset Reset
Beep Sound Beep Sound On On
5
Settings : System Settings : System
System
Auto Shut off Auto Shut off 5 Minutes 5 Minutes
Demonstration 5 Minutes
Start-up Start-up Video Mode Video Mode
File No. File No. Reset Reset
Beep Sound Beep Sound
On On
97 97