Maintenance : Cleaning and Maintaining the CAM
Regarding the Battery
I
Battery pack performance decreases when the
surrounding temperature is 10°C (50°F) or below, and
shortens the battery life. In that case, do one of the
following so that the durability of the battery life can be
extended for a longer period of time.
- Put the Battery Pack in a pocket to warm it up, and
insert it in your CAM immediately prior to use.
- Use a large capacity Battery Pack (Optional).
I
Be sure to set the Power/Mode selector to OFF when
not recording or playing back. The battery power is also
consumed in standby, play back and pause mode.
I
Have your Battery Packs ready for two or three times
the expected recording time, and make trial recordings
before make the actual recording.
I
Do not expose the Battery Pack to water.
The Battery Pack is not water resistant.
I
Keep the battery out of reach of children. If it is
swallowed, seek medical assistance immediately.
I
Wipe the battery with a clean dry cloth to ensure proper
contact.
I
Do not pick up the battery using metal tools as this may
cause a short circuit.
I
Do not short the battery or dispose of the battery in fire.
Do not disassemble the battery. The battery could
explode or catch fire.
I
Use only recommended batteries and accessories.
Use of batteries not expressly recommended for this
equipment may cause an explosion or leakage, resulting
in fire, injury or damage to the surroundings.
I
Install the battery according to the instructions.
Improperly installed batteries can cause damage to the
camcorder.
I
When you do not use for a long time, remove the
Battery Pack.
Otherwise, the battery may leak. To avoid damage to the
product, be sure to remove the battery when no charge
remains.
ENGLISH
123
123