Change Pin; Software Upgrade - Samsung SyncMaster 400CX-2 User Manual

Note
Before the setup screen appears, the PIN number input screen appears. Enter your 4
digit PIN number.
The default PIN number of a new TV set is 0-0-0-0. You can change the PIN by se-
lecting Change PIN from the menu.
When the parental ratings are set, the

Change PIN

You can change your personal ID number that is required to set up the TV.
Note
Before the setup screen appears, the PIN number input screen appears. Enter your
4digit PIN number.
The default PIN number of a new TV set is 0-0-0-0.
If you forget the PIN code, press the remote control buttons in the following sequence,
which resets the PIN to 0-0-0-0:
Support
Signal Information (digital channels only)
Unlike analogue channels, which can vary in reception quality from snowy to clear,
digital (HDTV) channels have either perfect reception quality or you will not receive them
at all. So, unlike analogue channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
Note
If the signal strength meter indicates that the signal is weak, physically adjust your an-
tenna to increase the signal strength. Continue to adjust the antenna until you find the
best position with the strongest signal.

Software Upgrade

Adjusting the LCD Display
symbol is displayed.
POWER (Off) → MUTE → 8 → 2 → 4 → POWER (On).
105