Introduction Package Contents Note Please make sure the following items are included with your LCD Display. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Checking the Contents of the Package Remove the lock from the package box, as shown in the figure above. Lift up the package box by Check the contents of the Remove the Styrofoam...
Page 3
Introduction Manuals Quick Setup Guide Warranty Card User's Guide (Not available in all loca- tions) MagicInfo Software CD, MagicInfo Manual CD (Applicable to the CXN-2 model only) Cables Power Cord Others Remote Control Batteries (AAA X 2) Cleaning Cloth (Not available in all loca- tions) HDD Cover (Applicable to the CXN-2...
Page 4
Introduction Sold separately D-Sub Cable DVI Cable LAN Cable (Applicable to the CXN-2 model only) Wall Mount KIT Component to D-sub Ca- D-sub / BNC Cable Semi Stand KIT Your LCD Display Front MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu.
Page 5
Introduction Adjust buttons (Left-Right buttons) / Volume buttons Moves from one menu item to another horizontally or adjusts selected menu values. When OSD is not on the screen, press the button to adjust volume. ENTER button [ENTER] Activates a highlighted menu item. SOURCE button [SOURCE] Switches from PC mode to Video mode.
Page 6
Introduction POWER S/W ON [ │ ] / OFF [O] Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port RGB/ COMPONENT IN (PC Video Con- nection Terminal) •...
Page 7
Introduction Use a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC) DVI / RGB AUDIO IN (PC/DVI/Audio Connection Terminal (Input)) AV / COMPONENT AUDIO IN [R- AU- DIO- L] Connect the port of the DVD, VCR (DVD / DTV Set-Top Box) to the [ R- AUDIO - L ] port of the LCD Display.
Page 8
Introduction ANT IN Connect the CATV cable or TV antenna ca- ble to the " ANT IN" port on the rear side of the LCD Display. Make sure to use a TV an- tenna cable (sold separately) as the antenna cable.
Page 9
Introduction Connect the Kensington Lock cable. Fix the Kensington Lock to a desk or a heavy stationary object. Note See Connecting Cables for further information regarding cable connections. Remote Control Note The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the frequen- POWER Number Buttons...
Page 10
Introduction The "-" button is used to select Digital channels. For exam- 4. DEL button ple, channel 4-1. 5. + VOL - Adjusts the audio volume. Press the button to change the input signal SOURCE. SOURCE Changing the SOURCE is only allowed for external devices that are connected to the LCD Display at the time.
Connections Connecting a Computer Note AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display. For detailed information on connecting AV input devices, refer to the contents under Adjusting Your LCD Display. (Applicable to the CXN-2 model only) Connect the power cord for your LCD Display to the power port on the back of the LCD Display.
Note • Turn on both your computer and the LCD Display. • Contact a local SAMSUNG Electronics Service Center to buy optional items. Connecting to Other devices Note • AV input devices such as DVD players, VCRs or camcorders as well as your computer can be connected to the LCD Display.
Connections Connect the CATV cable or TV antenna cable to the "ANT IN" port on the rear side of the LCD Display. Make sure to use a TV antenna cable (sold separately). When using an interior antenna terminal: • Check the antenna terminal on the wall first and connect the antenna cable. When using an outdoor antenna: •...
Connections Connecting using a Component Cable Connect a set of audio cables between the AV/COMPONENT AUDIO IN [R-AUDIO-L] on the LCD Display and the AUDIO OUT jacks on the DVD player.or other external device. Connect the Component to D-sub cable(sold separately) to the product's RGB/COM- PONENT IN port and the DVD player's COMPONENT - PR, Y, PB ports.
Connections Then, start the Camcorder with a tape inserted. Note The audio-video cables shown here are usually included with a Camcorder. (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables.
Connections Connecting Using a DVI Cable Connect between the DVI OUT port on the LCD monitor and the input port on another monitor using a DVI cable. Connect between the AUDIO OUT port on the LCD monitor and the audio input port on another monitor using a stereo cable.
Connections Connecting Using a D-SUB / BNC Cable Connect the RGB/COMPONENT IN port on the monitor to the BNC port on the PC using the D-SUB to BNC cable. Connecting to an Audio System Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and AUDIO OUT on LCD Display.
Connections Note Connect the LAN cable. (CXN-2 model only) Connecting a USB device Note You can connect USB devices such as a mouse or keyboard. (CXN-2 model only)
Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check Turn off both your computer and the LCD Display. Unplug the video cable from the back of the computer. Turn on the LCD Display.
Troubleshooting • Do not use benzene, thinner or other flammable sub- stances. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel). • Never use acetone, benzene or thinner. The user will be required to pay costs and related expenses for repairing damages caused.
Troubleshooting The LCD Display screen flickers. Check if the signal cable between the computer and the LCD Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. The screen is blank and the power indicator is off.
Troubleshooting (Refer to the Brightness, Contrast) The screen color is inconsistent. Adjust color using Custom under OSD Color Adjustment menu. The color image is distorted by dark shadows. Adjust color using Custom under OSD Color Adjustment menu. The color white is poor. Adjust color using Custom under OSD Color Adjustment menu.
Page 23
Troubleshooting Check the polarities (+/-) of the batteries. Check if the batteries are empty. Check if the power is on. Check if the power cord is securely connected. Check if a special fluorescent or neon lamp is on in the vicinity. Q &...
Page 24
Troubleshooting The video supports the MPEG1 and WMV codecs only. Install the corresponding codec to play the video. Note that some of the codecs can be incompatible. Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself.