Page 1 SyncMaster 400PXn/400PX /460PXn/460PX Model Select Language Safety Instructions Install Programs PDF Manuals Registration Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting Specifications Information Appendix © 2007 Samsung Electronics Co., Ltd. All rights reserved.
Page 2 Select Language Main Page Model Safety Instructions Notational Power Installation Clean Others Introduction The color and appearance of the product may vary depending on the model, and the product specifications are Connections subject to change without prior notice for reasons of performance enhancement. Using the Software Safety Instructions Adjusting the LCD Display...
Page 3 Use only a properly grounded plug and receptacle. An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage.
Page 4 Do not drop the LCD Display when moving it. This may cause damage to the product or the person carrying it. Install the LCD Display base in a showcase or shelf so that the end of the base does not protrude from the showcase or shelf. Dropping the product may cause damage to the product or the person carrying it.
Page 5 The installation of the bracket must be done by a qualified professional. Installing the bracket by unqualified personnel may result in injury. Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10 cm / 4 inches) for ventilation purposes.
Page 6 Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the SAMSUNG customer care center or Customer Center for interior cleaning once a year. Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause a malfunction or fire.
Page 7 Do not try to move the LCD Display by pulling only the wire or the signal cable. This may cause a breakdown, electric shock or fire due to damage to the cable. Do not move the LCD Display right or left by pulling only the wire or the signal cable.
Page 8 outlet and contact the Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. Change the mode to energy saving mode or set a screensaver to a changing picture when away from the LCD Display for an extended period of time.
Page 9 Place the product out of children’s reach, as they could damage by hanging onto it. A falling product may cause injury to the person or even fatality. When not using the product for an extended period of time, keep the product unplugged.
Page 11 SyncMaster 400PXn/460PXn Select Language Main Page Model Safety Instructions Introduction Package Contents Your LCD Display Machanical Layout Connections The color and appearance of the product may vary depending on the model, and the product specifications are Using the Software subject to change without prior notice for reasons of performance enhancement. Adjusting the LCD Display Troubleshooting Introduction...
Page 12 Remote Control Batteries (AAA X 2) Cover-Hole BNC to RCA Semi Stand USB Holder & Screw (1EA) Adaptor Jack Sold separately Wall Mount KIT Speaker Set Stand KIT DVI Cable LAN Cable BNC Cable Your LCD Display Front MENU Opens the on-screen menu and exits from the menu or closes the adjustment menu. Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values.
Page 13 Adjusts the audio volume. ENTER Activates a highlighted menu item. SOURCE Switches from PC mode to Video mode. Changing the source is only allowed for external devices that are connected to the LCD Display at the time. [PC] → [BNC] → [DVI] → [AV] → [S-Video] → [Component] → [MagicNet] >>...
Page 14 POWER S/W ON [ | ] / OFF [O] Switches the LCD Display On/Off. POWER IN The power cord plugs into the LCD Display and the wall plug. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port DVI / PC IN [DVI(HDCP)] (PC Video Connection Terminal) Using a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC)
Page 15 Audio Connection Terminal (Input)) 11) AV OUT [VIDEO] (VIDEO Connection Terminal): AV mode (Output) 12) AV IN [VIDEO] (VIDEO Connection Terminal) (Input) 13) AV OUT [S-VIDEO] (S-VIDEO Connection Terminal): S-VIDEO mode (Output) 14) AV IN [S-VIDEO] (S-VIDEO Connection Terminal) (Input) 15) EXT SPEAKER(8 Ω)[- - L - +, - - R - +] (EXT Speaker Connection Terminal) 16) AUDIO OUT [L-AUDIO-R] (LCD Display...
Page 16 3. MDC 4. LOCK 5. MagicNet buttons 6.+100 -/-- 7. VOL MUTE TTX/MIX MENU ENTER P.MODE 13. AUTO PRE-CH 15 . CH/P SOURCE INFO EXIT 19. Up-Down Left-Right buttons S.MODE 21. STILL 22. FM RADIO 23. P.SIZE DUAL/MTS SOURCE SWAP SIZE STOP PLAY/PAUSE...
Page 17 MENU Opens the on-screen menu and exits from the menu screen or closes the screen adjustment menu. ENTER Activates a highlighted menu item. P.MODE When you press this button, current picture mode is displayed on the lower center of the screen. AV / S-Video / Component : P.MODE The Monitor has four automatic picture settings that are preset at the factory.
Page 18 The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window. SIZE Switches the PIP Picture Size. Rewind STOP Stop PLAY / PAUSE Play/Pause Fast forward © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 19 SyncMaster 400PX/460PX Select Language Main Page Model Safety Instructions Introduction Package Contents Your LCD Display Machanical Layout Connections The color and appearance of the product may vary depending on the model, and the product specifications are Using the Software subject to change without prior notice for reasons of performance enhancement.
Page 20 Remote Control Batteries (AAA X 2) Cover-Hole BNC to RCA Semi Stand Adaptor Jack Sold separately Wall Mount KIT Speaker Set Stand KIT DVI Cable LAN Cable BNC Cable Your LCD Display Front MENU Opens the on-screen menu and exits from the menu or closes the adjustment menu. Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values.
Page 21 Adjusts the audio volume. ENTER Activates a highlighted menu item. SOURCE Switches from PC mode to Video mode. Changing the source is only allowed for external devices that are connected to the LCD Display at the time. [PC] → [BNC] → [DVI] → [AV] → [S-Video] → [Component] >>...
Page 22 POWER S/W ON [ | ] / OFF [O] Switches the LCD Display On/Off. POWER IN The power cord plugs into the LCD Display and the wall plug. RS232C OUT/IN (RS232C Serial PORT) MDC(Multiple Display Control) Program Port DVI / PC IN [DVI(HDCP)] (PC Video Connection Terminal) Using a DVI Cable (DVI-D to DVI-D) - DVI mode (Digital PC)
Page 23 Audio Connection Terminal (Input)) 11) AV OUT [VIDEO] (VIDEO Connection Terminal): AV mode (Output) 12) AV IN [VIDEO] (VIDEO Connection Terminal) (Input) 13) AV OUT [S-VIDEO] (S-VIDEO Connection Terminal): S-VIDEO mode (Output) 14) AV IN [S-VIDEO] (S-VIDEO Connection Terminal) (Input) 15) EXT SPEAKER(8 Ω)[- - L - +, - - R - +] (EXT Speaker Connection Terminal) 16) AUDIO OUT [L-AUDIO-R] (LCD Display...
Page 24 DUAL/MTS SOURCE SWAP SIZE STOP PLAY/PAUSE ON / OFF Turns the LCD Display On/Off. MAGICNET MagicNet Quick Launch Button. - This fuction does not work for this monitor. MDC Quick Launch Button. LOCK Activates or deactivates all function keys on both the remote control and the LCD Display except for the Power and LOCK buttons.
Page 25 TV channels provide text information services via teletext. - This fuction does not work for this monitor. MENU Opens the on-screen menu and exits from the menu screen or closes the screen adjustment menu. ENTER Activates a highlighted menu item. P.MODE When you press this button, current picture mode is displayed on the lower center of the screen.
Page 26 The image in the PIP window will appear on the main screen, and the main screen image will appear in the PIP window. SIZE Switches the PIP Picture Size. Rewind STOP Stop PLAY / PAUSE Play/Pause Fast forward © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 27: Wall Bracket Installation
SyncMaster 400PXn/400PX Mechanical Lay-out Monitor Head Stand Speaker Installation VESA Bracket Wall Bracket Installation 1. Mechanical Lay-out Dodatak 2. Monitor Head...
Page 28: Installation Vesa Bracket
After your order is placed, installation professionals will visit you and install the bracket. At least 2 persons are needed in order to move the LCD Monitor. Samsung is not responsible for any product damage or any injury caused by installation at customer's discretion. Dimensions...
Page 29 6. Wall Bracket Installation Contact a technician for installing the wall bracket. Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
Page 30 There are two hinges(left and right). Use the correct one. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust the length.
Page 31: Wall Bracket
Remove the 4 screws on the back of the product. Insert the screw B into the plastic hanger. 1. Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers. 2.
Page 32 1. Fix the product to the wall bracket. Make sure to use the top center, and not the 2. Hold the product at the top in the center and pull it forward leftor the right side of the product to adjust the (direction of the arrow) to adjust the angle.
Page 33 SyncMaster 460PXn/460PX Mechanical Lay-out Monitor Head Stand Speaker Installation VESA Bracket Wall Bracket Installation 1. Mechanical Lay-out Dodatak 2. Monitor Head...
Page 34 After your order is placed, installation professionals will visit you and install the bracket. At least 2 persons are needed in order to move the LCD Monitor. Samsung is not responsible for any product damage or any injury caused by installation at customer's discretion. Dimensions...
Page 35: Captive Screw
6. Wall Bracket Installation Contact a technician for installing the wall bracket. Samsung Electronics is not responsible for any damages to the product or harm to customers when the installation is done by the customer. This product is for installing on cement walls. The product may not stay in place when installed on plaster or wood.
Page 36 There are two hinges(left and right). Use the correct one. Before drilling into the wall, check if the length between the two locking holes at the back of the product is correct. If the length is too short or long, loosen all or some of the 4screws on the wall bracket to adjust the length.
Page 37 Remove the 4 screws on the back of the product. Insert the screw B into the plastic hanger. 1. Mount the product on the wall bracket and make sure it is properly fixed to the left and right plastic hangers. 2.
Page 38 1. Fix the product to the wall bracket. Make sure to use the top center, and not the 2. Hold the product at the top in the center and pull it forward leftor the right side of the product to adjust the (direction of the arrow) to adjust the angle.
Page 39 Installing the Stand KIT Dodatak Appendix Note • Only the supplied bolts should be used. Caution Samsung Electronics will not be responsible for damages caused by using a base other than those specified. Installing the Semi Stand Left stand Right stand Caution Make sure to install the stand with the Caution label folded backwards.
Page 40 This stand is designed for adjusting the screen angle. The company is not responsible for any problem caused when using this stand. Under no circumstances use the product as a stand for placing something on. Installing the Stand KIT (sold separately) A 'Cover-Protector' is used to protect the hole at the bottom of the LCD Display , where the stand is inserted.
Page 41 Connect the audio cable for your LCD Display to the audio port on the back of your computer. Turn on both your computer and the LCD Display. Note • The DVI cable or BNC cable is optional. Contact a local Samsung Electronics Service Center to buy optional items.
Page 42 Connecting Digital DVD Note • Input devices such as digital DVD are connected to the DVI IN terminal of the monitor using the DVI cable. • Then, start the DVD with a DVD disc inserted. • Select Digital using the SOURCE button. Note •...
Page 43 Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and the AUDIO OUT jacks on the DVD player. Connect a Component cable between the BNC/COMPONENT IN - P , Y, P port on the LCD Display and the P , Y, P jacks on the DVD player.
Page 44 (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Connecting to a DTV Set Top Box Note • The connections for a typical Set Top Box are shown below. Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and the AUDIO OUT jacks on the Set Top Box.
Page 45 the speaker connection jack on the back of the speaker. Note • Do not move the SET while the SET is connected to the speakers. The speaker-bracket for connecting the SET speaker my become damaged. Connecting to an Audio System Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and the AUDIO OUT [L-AUDIO-R] on LCD Display.
Page 46 You can connect USB devices such as a mouse or keyboard. Using a USB Holder When using a small external device such as a portable memory stick and it is connected to the USB terminal at the back of your monitor, it is exposed to the possiblity of theft or loss. By installing a USB holder after the installation of an external device, you can prevent theft or loss.
Page 47 USB holder with the bottom of part at the back of your monitor. Insert a screw into the groove aligned in step [2], and fasten it. Align with and use a screw to fix them. © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 48 Installing the Stand KIT Dodatak Appendix Note • Only the supplied bolts should be used. Caution Samsung Electronics will not be responsible for damages caused by using a base other than those specified. Installing the Semi Stand Left stand Right stand Caution Make sure to install the stand with the Caution label folded backwards.
Page 49 This stand is designed for adjusting the screen angle. The company is not responsible for any problem caused when using this stand. Under no circumstances use the product as a stand for placing something on. Installing the Stand KIT (sold separately) A 'Cover-Protector' is used to protect the hole at the bottom of the LCD Display , where the stand is inserted.
Page 50 Connect the audio cable for your LCD Display to the audio port on the back of your computer. Turn on both your computer and the LCD Display. Note • The DVI cable or BNC cable is optional. Contact a local Samsung Electronics Service Center to buy optional items.
Page 51 Connecting Digital DVD Note • Input devices such as digital DVD are connected to the DVI IN terminal of the monitor using the DVI cable. • Then, start the DVD with a DVD disc inserted. • Select Digital using the SOURCE button. Note •...
Page 52 Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and the AUDIO OUT jacks on the DVD player. Connect a Component cable between the BNC/COMPONENT IN - P , Y, P port on the LCD Display and the P , Y, P jacks on the DVD player.
Page 53 (If not, check your local electronics store.) If your camcorder is stereo, you need to connect a set of two cables. Connecting to a DTV Set Top Box Note • The connections for a typical Set Top Box are shown below. Connect a Component cable between the BNC / COMPONENT IN - P , Y, P port on the LCD Display and...
Page 54 The speaker-bracket for connecting the SET speaker my become damaged. Connecting to an Audio System Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and the AUDIO OUT [L-AUDIO-R] on LCD Display. © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 55 SyncMaster 400PXn/460PXn Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Installation MagicNet MagicNet The color and appearance of the product may vary depending on the model, and the product specifications are subject to change without prior notice for reasons of performance enhancement. Adjusting the LCD Display Troubleshooting Using the Software...
Page 56 Choose a folder to install the MagicNet program. Click "Install." The "Installation Status" window appears.
Page 57 When the installation is complete, the MagicNet executable icon appears on your desktop. Double-click the icon to start the program. System Requirements Ethernet Application Windows XP Minimum P1.8 256M 100M/1G Windows 2000 WMP 9 or later Recommended P3.0Ghz 512M (Service Pack 4) © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 58: Main Screen
Therefore, a serial cable should be connected between the serial port on a PC and the serial port on a display. Main Screen Click Start > Program > Samsung > MDC System to start the program. Select a set to see the volume of the selected set within the slider.
Page 59: Port Selection
Main Icons Select Button Remocon Info Grid Safety Lock Display Selection Port Selection Control Tools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote control signal receiving function of the display unit. 3.
Page 60: Power Control
1. The Multiple Display Control is originally set to COM1. 2. If any port other than COM1 is used, COM1 through COM4 can be selected in the Port Selection Menu. 3. If the exact port name that is connected to the LCD Display using a serial cable is not selected, communication will be unavailable.
Page 61 Info Grid shows some basic information necessary to Power Control. (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All button or Check Box to choose a display to control. Power Control allows controlling some of the functions of the selected display. 1) Power On/Off...
Page 62: Input Source
- Turns the power of the selected display On/Off. 2) Volume - Controls the volume level of the selected display. It receives the volume value of the selected display from the sets and displays it in the slider. (When you cancel the selection or choose Select All, the value returns to the default value 10) (Mute On/Off) - Turns on/off the Mute function of the selected display.
Page 63: Image Size
Info Grid shows some basic information necessary to Input Source Control. 1) PC - Changes the Input Source of the selected display to PC. 2) BNC - Changes the Input Source of the selected display to BNC. 3) DVI - Changes the Input Source of the selected display to DVI. 4) TV - Changes the Input Source of the selected display to TV.
Page 64 Info Grid shows some basic information necessary to Image Size Control. ( Power Status) - Shows the power status of the current display. 2) Image Size - Shows the current Image Size of the display in use. 3) Input - Shows the current Input Source of the display in use. 4) Info Grid displays only the displays whose Input Source is PC, BNC, DVI.
Page 65 Info Grid shows some basic information necessary to Image Size Control. 1) Click the Video Source tab to adjust Image Size for TV, AV, S-Video, Component. , DVI(HDCP). Click Select All or use Check Box to select a display to control. 2) Info Grid displays only the display having TV, AV, S-Video, Component or DVI(HDCP) as input source.
Page 66: Pip Size
Info Grid shows some basic information necessary to Time Control. 1) Current Time - Set the current time for the selected display (PC Time). - To change the current time, first change the PC Time. 2) On Time Setup - Set the Hour, Minute, AM/PM of On Time Setup, Status, Source, Volume of the selected display. 3) Off Time Setup - Set the Hour, Minute, and AM/PM, Status for Off Time Setup of the selected display.
Page 67: Pip Source
Info Grid shows some basic information necessary to PIP Size Control. 1) PIP Size - Shows the current PIP Size of the display in use. 2) OFF - Turns off the PIP of the selected display. 3) Large - Turns on the PIP of the selected display and changes the size to Large. 4) Small - Turns on the PIP of the selected display and changes the size to Small.
Page 68 • PIP S-Video Mode Info Grid shows some basic information necessary to PIP Source Control. 1) PIP Source - PIP Source can be controlled with turning on the LCD Display power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of the PIP of the selected display to BNC.
Page 69 6) AV - Changes the source of the PIP of the selected display to AV. 7) S-Video - Changes the source of the PIP of the selected display to S-Video. 8) Component - Changes the source of the PIP of the selected display to Component. 9) Channel - Channel arrow appears when the PIP Source is TV.
Page 70: Picture Pc
- Adjusts Tint of the selected display. - Available only for NT. 7) Color Tone - Adjusts the Color Tone for the selected display. The Input source of MagicNet works only on MagicNet model. The Input source of TV works only on TV model. This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed.
Page 71: Image Lock
This feature is available only for the displays whose power status is ON and if no selection is made, the factory default is displayed. Settings Audio 1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. When each function is selected, the set value of the selected function is displayed in the slide.
Page 72: Lamp Control
1. Click Settings of the main icons and the Settings Control screen appears. Info Grid shows some basic information necessary to Settings Control. 1) Image Lock - Available only for PC, BNC. 2) Coarse - Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display.
Page 73 An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows the Maintenance Control function for all input sources. 2) Auto Lamp Control - Automatically adjusts the backlight of the selected display at a specified time. The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 3) Manual Lamp Control - Allows you to adjust the backlight of the selected display regardless of the time.
Page 74: Video Wall
1) Safety Screen - Eliminates the afterimages that can result when the selected display stays in Pause mode for an extended period of time. You can set the repeat cycle timer by selecting the "Interval" by hour and "Second" by second. It can be set to Scroll, Pixel, Bar and Eraser by Screen Type.
Page 75 You can select a number of screens with a different layout when dividing. Select a mode from Screen divider. Select a display from Display Selection. The place will be set up by pressing a number in the selected mode. The MDC program supplied by Samsung supports over 4*4. 3) On / Off...
Page 76: Troubleshooting
- Turns on/off the Video Wall function of the selected display. 4) Format - The format can be selected to see a divided screen. Full Natural You may not operate this function in MagicNet. The Input source of TV works only on TV model. The Maintenance Control function is available only for the displays where the power status is ON.
Page 77 4. Selected all sets using Select All: Returns to the Factory Default Value.
Page 78 Introduction Schedule Function Basic Remote Control Troubleshooting Specifications to MagicNet Setting Setting Setting Adjustment Introduction to MagicNet Introduction to MagicNet Added Functions in MagicNet Introduction to MagicNet MagicNet transmits media files (photo, audio and movie files) and office files existing on a server to monitors using the Ethernet network of the server/client architecture.
Page 79 2. Account Management This function prevents a random user from freely using MagicNet, by placing limits on the operation of functions according to the account privilege. 3. Update You can update a monitor's MagicNet from the server. However, this function only works when it is connected to a server/monitor with MagicNet Ver 2.0 or higher. For SyncMaster 320PXn/400P(T)Xn/460PXn, see Add/Remove Programs.
Page 80: Schedule Setting
Introduction Schedule Function Basic Remote Control Troubleshooting Specifications to MagicNet Setting Setting Setting Adjustment Schedule Setting Registering to the Library Registering / the Schedule Export/Import Schedule Registering to the Library The server program's Power-On option works only if the monitor's power is completely shut off.
Page 81 My Computer Socket Serial 1. My Computer You can register files in My Computer. 2. URL : Supportable for SyncMaster 320PXn/400P(T)Xn/460PXn only...
Page 82 You can register URLs through the Internet. Nick Name You can name a nick name of a URL to be registered so that it can be used for load and edit operation. (If you register with the same nick name, the existing URL, which has been registered with the nick name is replaced with the new one.) Address Set a URL address to be registered.
Page 83 Set an address to be registered. (You have to set the shared IP and folder name.) Connect Connect to NFS using the registered nick name and address. If the connection is successfully established, the following ( ) Open and Add buttons are activated. Path Shows a successfully connected NFS path.
Page 84 (.txt) data) using the successfully established connection information. Load TEXT(.txt) data of the path set in the File Navigation, copy the data to the server PC and save the data onto the DB. =>In an original text (.txt) data file, "," and "LineFeed" are used as delimeters between cells that are determined during the Multi Screen edit operation.
Page 85 Registered files A window that shows DB information. 6. Serial : Supportable for SyncMaster 320PXn/400P(T)Xn/460PXn only Serial You can register TEXT(.txt) data through Serial. Nick Name You can name the nick name of a TEXT(.txt) data to be registered so that it can be used for load and edit operation. (If you register with the same nick name, the existing data, which has been registered with the nick name, is replaced with the new one.) You can open a connection via serial cable using the connection...
Page 86 Registering / the Schedule Allows you to register the files to be run on the monitor in advance. 1. Library Registering the schedule through the library Among the files on the server PC, files that are added through the registration procedures in the library can be registered with the schedule.
Page 87 1. Monitor List Selecting either all monitors or a specific monitor, where the schedule will be added to, is available from among the monitors connected via the network. 2. Schedule a File Add/Delete You can select, add or delete the file to be added to the schedule. 3.
Page 88 You can configure the settings of Bass, Treble, Balance, and SRS TSXT. 7. Slide Show : Supportable for SyncMaster 320PXn/400P(T)Xn/460PXn only Determines the slide transition interval for Slide Show. 2. Storage (Local/USB) Registering the Storage (Local/USB) File Schedule You can select a file from among the local storage of the monitor, or from the USB connected to the monitor to register the selected file with the schedule.
Page 89 2. You can add a file from the local storage device of the monitor, or from the USB connected to the monitor by pressing the add button. In this case, it will not go through the library registration procedures on the server. 3.
Page 90 You can divide the monitor screen to display multiple contents at the same time. Screen Partition A pop-up window appears where you can select the number of screens to be divided for display. (1x1, 2x1, 1x2 and 2x2 are available) Monitor List A pop-up window appears where you can select a monitor to be scheduled.
Page 91 Preview the text (.txt) data item registered in NFS/FTP/Socket/Serial to edit each cell data. Font/Size/Bold/Italic/Underline/Align Left/Center/Align Right/Text Color/Text Background/Border Color can be configured. Right-click in the Preview window to display the Edit List. Undo : You can restore the Delete Column, Delete Row, Column Width and Row Height settings.
Page 92 If audio for the selected screen is unavailable, the Sound button is disabled. The Sound button when the audio of the selected screen is not selected. The Sound button when the audio of the selected screen is selected. You can set the channel when the selected screen is set to TV. When the mouse pointer is located between the selected screens, the pointer changes to the arrow shape.
Page 93 Allows you to import/export the schedules registered on the LCD display from/to a server computer. A function for saving the schedule registered in the monitor to the server as a file and load the file. Save the schedule between the specified start and end dates and load the schedule starting from the specified start date.
Page 94: Function Setting
Introduction Schedule Function Basic Remote Control Troubleshooting Specifications to MagicNet Setting Setting Setting Adjustment Function Setting Schedule OSD MDC OSD Message OSD Schedule OSD The server program's Power-On option works only if the monitor's power is completely shut off. Please make sure not to use the Power-On option when the monitor is in the process of shutting up since it can possibly cause systemetic error on the monitor.
Page 95 Monitor Preview Window This window is used either to preview a file (a movie or photo file) registered in the library list ( )and selected in the fields window( ), or to monitor a monitor. 1. Playing a file registered in the library Click on a classification in the library list ( ), and the files under the selected classification are displayed in the fields window (...
Page 96 When the files are selected in the library list : Sequentially displays the image files registered to the library. Slide Show When monitoring information is being played from a schedule : Displays the image files registered to the schedule. When monitoring the information which the monitor user is selecting and playing : This function is disabled.
Page 97 seconds Plays the first/last 5 seconds of the file. When monitoring the information which the monitor user is selecting and playing : This function is disabled. Library List Files added to the library are first, automatically classified in the list as movie, audio, photo and office files, and then they are further classified according to their properties.
Page 98 This item enables you to update MagicNet (File name: NK.bin) on the monitor. 2. This item will be deactivated in monitors that are not connected to a server. 3. If you select the Update item, a window pops up. Search for the path to NK.bin, select it, and click the Update button.
Page 99 3. The files registered to the library are displayed in a list. Right-clicking a file in the list displays a menu, allowing you to view properties for a schedule and deleting a schedule, depending on the kind of menu. You can also directly insert the selected file into a schedule. Schedule OSD MDC OSD Message OSD...
Page 100 Power Power - Select Power On/Off Channel - Channel - / + Volume - When changing the volume, the changed details will appear in an OSD on the monitor screen. 0 ~ 100 Source In the source tab, the output source of the monitor can be changed. When selecting the following output source, it will change to the relevant output source.
Page 101 MagicBright : Entertain, Internet, Text, Custom, Contrast, Brightness Color Tone : Cool, Normal, Warm, Custom, Red, Green, Blue Size : 16:9, 4:3 Time Current Time Establishes the standard time of the monitor. In Hours, Minutes and AM/PM, select the time, and click the Apply button. The current standard time of the monitor will be set.
Page 102 S-Video Component TV : Supportable for SyncMaster 400TXn only Position Select a position. (LeftTop) (RightTop) (LeftBot) (RightBot) Swap Setting 1. Sound Mode Standard Music Movie Speech Custom Bass, Treble, Balance 2. Sound Option SRS TSXT ON/OFF Sound Select Main/Sub 3. Image Lock Coarse -/+ Fine -/+ Position...
Page 103 For example, when you choose 2*2, selectable buttons in the form of 2 rows and 2 lines appear, and if you select number 3 in this matrix, the third screen of the output screen divided by 4 will show up in the monitor. - The MDC program supplied by Samsung supports over 4*4. Format - Full, Natural Safety Lock...
Page 104 Display Option Normal: Outputs fixed sentences one by one. Scroll : Text scrolls. Trancparency : Sets the text background to transparent. Opaque : Sets the text background to opaque. Scroll and transparency are only applicable for the SyncMaster 320PXn/400P(T)Xn/460PXn. Display Period Marked in hours and minutes.
Page 105 Introduction Schedule Function Basic Remote Control Troubleshooting Specifications to MagicNet Setting Setting Setting Adjustment Basic Setting Login / Logout Change Password Option Help Login / Logout Before using MagicNet, you first need to login. After a successful login, the Login button changes to a Logout button. A successful login is required to use the majority of functions.
Page 106 Change Password You can change your password in the login status. Enter your password correctly before logging in. You will be prompted to enter the password for installing MagicNet, and this password will become the default password for the administrator account. If you forget the password, please remove the program and re-install it.
Page 107 If the monitor is turned off at the scheduled download time, the system tries to turn on the monitor and starts the download if the monitor is turned on within 3 minutes. Otherwise, the download will be canceled. 1) Displays a list of the settings for downloading files to the monitor or deleting files. (Displays the list for the currently connected monitor.) 2) Allows you to set the time for downloading files to the monitor or deleting files.
Page 108 Help 1. Help Runs program help. 2. About MagicNet Indicates the program version and the copyright details.
Page 109 Introduction Schedule Function Basic Remote Control Troubleshooting Specifications to MagicNet Setting Setting Setting Adjustment Remote Control Adjustment PHOTO MUSIC MOVIE OFFICE PHOTO Supported File Formats Image File : JPG, BMP Remote Control When the files are selected in the library list Previous file Stop slideshow / View the bottom menu bar Slideshow...
Page 110 Play / Pause during playback Stop playing Play in 5 seconds Play 5 seconds earlier Move to the previous file (when the cursor is placed at the top, it will go back to the last file of the previous page) Move to the next file (when the cursor is placed at the bottom, it will move to the first file of the next page)
Page 111 PHOTO MUSIC MOVIE OFFICE OFFICE Supported File Formats Office File : Power MS Office(Word, Excel, Power Point), HTML, PDF * Install the proper viewing (freeware) program to see MS Office (Word, Excel, Power Point) or PDF documents. Remote Control When the files are selected in the library list Move to the top (when the cursor is placed at the top, it will go back to the last file of the previous page)
Page 112 Power point Normal Move to the top Move to the previous page Move to the next page Move to the previous page Slideshow Exit Power point Power point Slideshow Stop slideshow Move to the top Move to the bottom Move to the next page Move to the previous page Exit Power point Word...
Page 113 Move the mouse cursor up Move the mouse cursor down Move the mouse cursor to the left Move the mouse cursor to the right Click when the cursor is placed over a link (move to the link) Exit the Internet...
Page 114 Introduction Schedule Function Basic Remote Control |Troubleshooting| Specifications to MagicNet Setting Setting Setting Adjustment Troubleshooting Troubleshooting Removing Program Troubleshooting In Preview, the file information can be viewed but not the image Office files are not displayed. Check the file for the format. When there is no codec available for the server, no file is displayed.
Page 115 2. For Windows XP, select [Start]->[Control Panel]. 3. Double-click the [Add or Remove Programs] icon in the Control Panel. 4. Click the MagicNet in the [Add or Remove Programs] window to highlight it. 5. Click [Change/Remove] to remove it. 6. Click OK to start removal of MagicNet. 7.
Page 116: Specifications
For JPEG, the EXIF Format (Digital Camera) is not supported. (However, Samsung digital cameras are supported) An Office file may take some time to be displayed on the monitor, depending on the file size. For movies, only the WMV and MPEG1 codecs are provided by default.
Page 117 MSC(Mass Storage Class) : Devices using the SCSI(Small Computer System Interface) command set Exception : Some manufacturers have wrongly specified their device to be USB standard compatible. Our product has exception handling procedures. But Some devices are unlikely to work properly. : Some manufacturers have wrongly specified their device to be SCSI compatible.
Page 118 SyncMaster 400PXn/460PXn Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Input The color and appearance of the product may vary depending on the model, and the product specifications are Picture subject to change without prior notice for reasons of performance enhancement. [PC / BNC /DVI Mode] Picture Adjusting the LCD Display...
Page 119 • PIP turns off when the LCD Display is switched to an external source. When external A/V devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off/On) Note •...
Page 120 2) BNC 3) DVI 4) AV 5) S-Video 6) Component Note • MagicNet cannot be renamed. Picture [PC / BNC / DVI Mode] Available Modes PC / BNC / DVI S-Video Component DVI-Video MagicNet MagicBright™ [MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER] MagicBright™...
Page 121 [The direct button on the remote control is the 'M/B' button.] Custom [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] / [< / >] → [ENTER] By using the on-screen menus, the contrast and brightness can be changed to your personal preference. 1) Contrast Adjusts the Contrast.
Page 122 [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] →[ENTER] → [< / >] / [∧ / ∨]→ [ENTER] Adjusts the screen location horizontally and vertically. Auto Adjustment [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] The values of Fine, Coarse, Position are adjusted automatically.
Page 123 Available Modes PC / BNC / DVI S-Video Component DVI-Video MagicNet Mode [MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER] The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory.
Page 124 [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] The color tones can be changed. The individual Color components are also user adjustable. 1) Cool 2 2) Cool 1 3) Normal 4) Warm1 5) Warm2 Size...
Page 125 Available Modes PC / BNC / DVI S-Video Component DVI-Video MagicNet Mode [MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER] The LCD Display has a built-in high fidelity stereo amplifier. 1) Standard Selects Standard for the standard factory settings. 2) Music Selects Music when watching music videos or concerts.
Page 126 Auto Volume [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] Reduces the difference in volume control between broadcasters. 1) Off 2) On SRS TSXT [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] SRS TSXT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers.
Page 127 MagicNet Language [MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER] You can choose from 11 languages. Note • The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Time Selects from one of 4 time settings, Clock Set, Sleep Timer, On Timer, and Off Timer.
Page 128 [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [MENU] This feature adjusts the brightness of the LCD Display in order to reduce power consumption. When watching LCD Display at night, set the "Energy Saving" mode option to "High" to reduce eye fatigue as well as power consumption.
Page 129 [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨]→ [ENTER] →[∧ / ∨] → [ENTER] Determines the time interval to run the Screen Scroll operation. (1~10 Hour) The time is calculated on the basis of the power on time. By default, the time is set to 10 hours.
Page 130 (Available in PC/BNC mode only.) 2) Color Reset [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [< / >]→ [ENTER] Multi Control Available Modes PC / BNC / DVI S-Video Component DVI-Video...
Page 131 Available Modes PC / BNC / DVI S-Video Component DVI-Video MagicNet MAGICNET Moves to the MagicNet OSD screen. Moves to the Multi Control OSD screen. LOCK Sets the Safety Lock function. 1) Lock On It will be locked. 2) Lock Off It wil be unlocked.
Page 132 Note • The operating system for this set only supports English so the other languages might be corrupted on the screen. • For MagicNet, a remote control is available for MagicNet. However, it is recommended using a separate USB keyboard. •...
Page 133 4) Rotation Displays an image file by turning it clockwise by 90 degrees. 5) Zoom Displays a reduced picture. 6) Close Closes the image control Menu. Music The MP3 file format is supported. Movie The MPEG1, WMV file format are supported. 1) Play Plays a movie file.
Page 134 • When the contents of Setup have been changed when EWF is in the Enable state, to save the changes in the disk, you must Commit them. • By selecting Disable, Enable or Commit, the system is restarted. © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 135 SyncMaster 400PX/460PX Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Input The color and appearance of the product may vary depending on the model, and the product specifications are Picture subject to change without prior notice for reasons of performance enhancement.
Page 136 When external A/V devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off/On) Note • More than one PIP cannot be overlapped on screen as BNC and the component use the same terminal. 1) PIP [MENU] →...
Page 137 5) S-Video 6) Component Picture [PC / BNC /DVI Mode] Available Modes PC / BNC / DVI S-Video Component DVI-Video MagicBright™ [MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER] MagicBright™ is a new feature providing the optimum viewing environment depending on the contents of the image you are watching.
Page 138 1) Contrast Adjusts the Contrast. 2) Brightness Adjusts the Brightness. Note • By adjusting the picture using the Custom function, MagicBright will change to Custom mode. Color Tone [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] The color tones can be changed.
Page 139 [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] The values of Fine, Coarse, Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. (Available in PC, BNC mode only) [The direct button on the remote control is the 'AUTO' button.] Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable.
Page 140 Available Modes PC / BNC / DVI S-Video Component DVI-Video Mode [MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER] The LCD Display has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory.
Page 141 The color tones can be changed. The individual Color components are also user adjustable. 1) Cool 2 2) Cool 1 3) Normal 4) Warm1 5) Warm2 Size [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] The Size can be switched.
Page 142 Available Modes PC / BNC / DVI S-Video Component DVI-Video Mode [MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER] The LCD Display has a built-in high fidelity stereo amplifier. 1) Standard Selects Standard for the standard factory settings. 2) Music Selects Music when watching music videos or concerts.
Page 143 [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] Reduces the difference in volume control between broadcasters. 1) Off 2) On SRS TSXT [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] SRS TSXT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers.
Page 144 [MENU] → [∧ / ∨] → [ENTER] → [ENTER] → [∧ / ∨] → [ENTER] You can choose from 11 languages. Note • The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Time Selects from one of 4 time settings, Clock Set, Sleep Timer, On Timer, and Off Timer.
Page 145 The picture parameters are replaced with the factory default values. 1) On 2) Off Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. When the Video Wall is on, you can adjust the Video Wall screen setting.
Page 146 1~10 Hour 3) Second [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [∧ / ∨]→ [ENTER] → [∧ / ∨] → [ENTER] Determines the time period to run the Screen Scroll operation. (1~5 Second) By default, the time is set to 5 seconds.
Page 147 Multi Control Available Modes PC / BNC / DVI S-Video Component DVI-Video Multi Control Assigns an individual ID to the SET. 1) ID Setup [MENU] → [∧ / ∨] → [ENTER] → [∧ / ∨] → [ENTER] → [ENTER] → [0~9] Assigns distinctive IDs to the SET.
Page 148 The preset password on the LCD Display is "0000". Note • Resetting the password for the function key lock. Press INFO → EXIT → MUTE. The password will be reset to '0000'. The remote control is required for resetting the password. © 1995~2007 SAMSUNG. ALL Rights Reserved...
Page 149 SyncMaster 400PXn/460PXn Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting The color and appearance of the product may vary depending on the model, and the product specifications are Self-Test Feature Check subject to change without prior notice for reasons of performance enhancement.
Page 150 Do not use benzene, thinner or other flammable substances, or a wet cloth. • We recommend that a Samsung cleansing agent is used to prevent damage to the screen. Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly.
Page 151 The LCD Display screen flickers. Display is securely connected. (Refer to Connecting to a Computer) Problems related to the Screen Note • Problems related to the LCD Display screen and their solutions are listed. Problems Solutions The screen is blank and the power Ensure that the power cord is firmly connected and the LCD LCD Display is on.
Page 152 • Problems related to audio signals and their solutions are listed below. Problems Solutions No sound. Ensure that the audio cable is firmly connected to both the audio-in port on your LCD Display and the audio-out port on your sound card. (Refer to the Connecting the LCD Display Check the volume level.
Page 153 LCD Display. How can I play the video? The video supports the MPEG1 and WMV codecs only. Install the corresponding codec to play the video. Note that some of the codecs can be incompatible. © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 154 SyncMaster 400PX/460PX Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting The color and appearance of the product may vary depending on the model, and the product specifications are Self-Test Feature Check subject to change without prior notice for reasons of performance enhancement.
Page 155 Do not use benzene, thinner or other flammable substances, or a wet cloth. • We recommend that a Samsung cleansing agent is used to prevent damage to the screen. Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel) smoothly.
Page 156 (Refer to Connecting to a Computer) Problems related to the Screen Note • Problems related to the LCD Display screen and their solutions are listed. Problems Solutions The screen is blank and the power Ensure that the power cord is firmly connected and the LCD LCD Display is on.
Page 157 Disconnect the power cord and then clean the LCD Display with a soft case/LCD Panel? cloth, using either a cleaning solution or plain water. Do not leave any detergent or scratches on the case. Do not let any water enter the LCD Display. © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 159 SyncMaster 400PXn Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the Monitor Troubleshooting The color and appearance of the product may vary depending on the model, and the product specifications are Specifications subject to change without prior notice for reasons of performance enhancement. General PowerSaver Specifications...
Page 160 Audio Input 2 RCA Jack Red(R) White(L), 0.5 Vrms (-9 dB) PC Audio Input 3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB) Frequency RF: 80 Hz ~ 15 kHz (at -3 dB) Response A/V: 80 Hz ~ 20 kHz (at -3 dB) Plug and Play Capability This monitor can be installed on any Plug &...
Page 161 ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. ® As an E NERGY STAR Partner, SAMSUNG has determined that this ® product meets the E NERGY STAR guidelines for energy efficiency. Preset Timing Modes...
Page 162 SyncMaster 400PX Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the Monitor Troubleshooting The color and appearance of the product may vary depending on the model, and the product specifications are Specifications subject to change without prior notice for reasons of performance enhancement.
Page 163 ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. ® As an E NERGY STAR Partner, SAMSUNG has determined that this ® product meets the E NERGY STAR guidelines for energy efficiency. Preset Timing Modes...
Page 164 Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 165 SyncMaster 460PXn Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the Monitor Troubleshooting The color and appearance of the product may vary depending on the model, and the product specifications are Specifications subject to change without prior notice for reasons of performance enhancement. General PowerSaver Specifications...
Page 166 Audio Input 2 RCA Jack Red(R) White(L), 0.5 Vrms (-9 dB) PC Audio Input 3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB) Frequency RF: 80 Hz ~ 15 kHz (at -3 dB) Response A/V: 80 Hz ~ 20 kHz (at -3 dB) Plug and Play Capability This monitor can be installed on any Plug &...
Page 167 ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. ® As an E NERGY STAR Partner, SAMSUNG has determined that this ® product meets the E NERGY STAR guidelines for energy efficiency. Preset Timing Modes...
Page 168 SyncMaster 460PX Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the Monitor Troubleshooting The color and appearance of the product may vary depending on the model, and the product specifications are Specifications subject to change without prior notice for reasons of performance enhancement. General PowerSaver Specifications...
Page 169 ENERGY2000 compliant when used with a computer equipped with VESA DPMS functionality. ® As an E NERGY STAR Partner, SAMSUNG has determined that this ® product meets the E NERGY STAR guidelines for energy efficiency. Preset Timing Modes...
Page 170 Like a fluorescent lamp, the screen has to repeat the same image many times per second to display an image to the user. The frequency of this repetition is called the Vertical Frequency or Refresh Rate. Unit: Hz © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 171 Select Language Main Page Model Safety Instructions Introduction Connections Using the Software Adjusting the LCD Display Troubleshooting The color and appearance of the product may vary depending on the model, and the product specifications are Specifications subject to change without prior notice for reasons of performance enhancement. Information Information For Better Display...
Page 172 Power Off, Screen Saver, or Power Save Mode Turn the power off for 4 hours after 20 hours in use Turn the power off for 2 hours after 12 hours in use Set the Monitor to power off with the PC Display Properties Power Scheme. Use a Screen saver if possible - Screen saver in one color or a moving image is recommended.
Page 173 Every 30 minutes, change the characters with movement. All area display Moving image together with Logo periodically. - Cycle: Display moving image together with Logo for 60 seconds after 4 hours in use. The best way to protect your monitor from Image retention is to turn Power off, or set your PC, or System to operate a Screen Saver program when you are not using it.
Page 174 . Time Interval : 1 ~ 10 hours ( Recommend : 1 ) . Time Period : 10 ~ 50 second ( Recommend : 50 ) Note • ( Please check CD's User Guide at "OSD Function", some model's will not available ) © 1995~2007 SAMSUNG. ALL Right Reserved...
Page 175 Appendix Contact SAMSUNG WORLDWIDE Contact SAMSUNG WORLDWIDE Terms Correct Disposal Authority Note • If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. North America U.S.A 1-800-SAMSUNG (7267864) http://www.samsung.com CANADA 1-800-SAMSUNG (7267864) http://www.samsung.com/ca...
Page 176 FRANCE 08 25 3260 (€ 0,15/min) http://www.samsung.com/fr GERMANY 01805-121213 ( € 0,14/Min) http://www.samsung.de HUNGARY 06-80-SAMSUNG (7267864) http://www.samsung.com/hu ITALIA 800 SAMSUNG (7267864) http://www.samsung.com/it LUXEMBURG 02 261 03 710 http://www.samsung.lu NETHERLANDS 0900 20 200 88 (€ 0,10/Min) http://www.samsung.com/nl NORWAY 231 627 22 http://www.samsung.com/no...
Page 177 Middle East & Africa SOUTH AFRICA 0860 7267864 (SAMSUNG) http://www.samsung.com/za 800SAMSUNG (7267864) U.A.E http://www.samsung.com/mea 8000-4726 Terms Sync Signal Sync (Synchronized) Signals refer to the standard signals that are required to display desired colors on the LCD Display. They are divided into Vertical and Horizontal Sync Signals. These signals display normal color images by the set resolution and frequency.
Page 178 Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material.

This manual is also suitable for:

Syncmaster 460px Syncmaster 460pxn Syncmaster 400pxn Be40psnb

Samsung SyncMaster 400PX User Manual

Quick Links

Related Manuals for Samsung SyncMaster 400PX

Summary of Contents for Samsung SyncMaster 400PX

This manual is also suitable for:

Table of Contents