Select All; Channel Mode; Fine Tune - Samsung SyncMaster 400CX-2 User Manual

Select All

• Select all reserved programmes.

Channel Mode

When press the
list.
• Added Ch : Channels will be switched within the memorized channel list.
• Favourite Ch : Channels will be switched within the favourite channel list.

Fine Tune

If the reception is clear, you do not have to fine tune the channel, as this is done au-
tomatically during the search and store operation. If the signal is weak or distorted, you
may have to fine tune the channel manually.
Note
Fine tuned channels that have been saved are marked with an asterisk " * " on the right-
hand side of the channel number in the channel banner.
To reset the fine-tuning, select Reset by pressing the
ENTER
Only Analogue TV channels can be fine tuned.
Setup
Note
The default setting may be different depending on the selected Input Mode (input signal
source selected in External Input List) and the selected resolution.
Adjusting the LCD Display
P button, Channels will be switched within the selected channel
button.
or
101
button and then press the