TRENDnet TEG-7080ES User Manual page 5

TRENDnet User's Guide
LED Indicators
•
POWER LED
When the POWER LED light is on, the device is receiving
On :
power.
When the Power turns off, the power adapter is not
Off :
connected or the device is not receiving power.
•
SYSTEM LED
On (Amber) : When the amber SYSTEM LED light is on, the device is
booting up
On (Green) : When the green SYSTEM LED light is on, the device has
finished booting and is ready for operation.
LED ON/OFF Button
Click Once : When the LED ON/OFF button is clicked, the device will
disable all LED lights aside from the POWER LED.
Hold 3 : When the LED ON/OFF button is held for 3 seconds, the
Seconds device will automatically begin running cable diagnostics.
© Copyright 2018 TRENDnet. All Rights Reserved.
10GBASE-T Ethernet Port LEDs
•
Link/Activity (Left hand LED - per port)
On (Amber) : When the Link/Act LED is on, the link established is
operating at 5Gbps speeds.
On (Green) : When the Link/Act LED is on, the link established is
operating at 10Gbps speeds.
Off When the Link/Act LED light is off, there is no
established connection.
•
Link/Activity (Right hand LED - per port)
On (Amber) : When the Link/Act LED is on, the link established is
operating at 100/1000Mbps speeds.
On (Green) : When the Link/Act LED is on, the link established is
operating at 10Gbps speeds.
Off When the Link/Act LED light is off, there is no
established connection.
10GBASE-T Ethernet Port LEDs
•
Cable Diagnostic (Per port)
Blinking : When the CABLE DIAGNOSTIC LED is blinking Green, the
(Green) port is executing cable diagnostics.
Blinking When the CABLE DIAGNOSTIC LED is blinking Amber,
the link is not established.
(Amber)
On (Green) When the CABLE DIAGNOSTIC LED is on, the diagnostic
has determined a healthy connection.
On (Amber) : When the CABLE DIAGNOSTIC LED is on, the diagnostic
has determined an unhealthy connection.
TEG-7080ES
3