Auto Clock; Register The Handset Or Additional Handsets - Philips D465 Extended User Documentation

Auto clock

Note
•
This service is country and network
dependent.
•
Make sure you have subscribed to the caller
ID service before you use this feature.
It synchronizes the date and time
on your phone with the public
switched telephone network (PSTN)
automatically. For the date to be
synchronized, make sure the current
year is set.
1
Select [Menu] > [Services] > [Auto
clock], then press [OK] to confirm.
2
Select [On]/[Off] . Press [OK].
» The setting is saved.
Register the handset or
additional handsets
You can register additional handsets
to the base station. The base station
can register up to 4 handsets.
Auto registration
1
You can auto-register handsets of
the same model as follows:
• If the handset is in [Register
your Handset] status, press
[OK].
If the handset is in [Searching]
•
and [Unavailable] status, press
42
EN
[Menu] > [Services] > [Register] >
[Auto] > [OK].
2
Place the unregistered handset on
the base station.
» The handset detects the
base station and registers
automatically.
» Registration is complete in less
than two minutes. The base
station automatically assigns
a handset number to the
handset.
Manual registration/Pairing
1
You can also register your
handsets manually as follows:
• If the handset is in [Register
your Handset] status, press
[OK].
• If the handset is in [Searching]
and [Unavailable] status, press
[Menu] > [Services] > [Register] >
[Manual] > [OK].
2
Press and hold
station for 10 seconds.
3
Enter the system PIN. Press [Clear]
to make corrections. Then press
[OK] to confirm the PIN.
» Registration is complete in
less than 2 minutes. The base
automatically assigns a handset
number to the handset.
on the base