Display Icons; Check The Signal Strength - Philips D465 Extended User Documentation

Display icons

In standby mode, the icons shown on
the main screen tell you what features
are available on your handset.
Icon Descriptions
When the handset is off the
base station/charger, the
bars indicate the battery
level (from full to low).
When the handset is on
the base station/charger,
the bars keep scrolling until
charging is complete.
The empty battery icon
flashes and you hear an alert
tone.
The battery is low and needs
recharging.
It shows the connection
status between the handset
and base station. The more
bars are shown, the better
the signal strength is.
It remains steadily on when
browsing incoming calls in
the call log.
It remains steadily on when
browsing outgoing calls in
the redial list.
It flashes when there is a
new missed call or when
browsing unread missed
calls in call log.
It remains steady on when
browsing the read missed
calls in call log.
It remains steadily on when
browsing blocked calls in call
log.
It flashes when receiving
incoming call.
It remains steadily on when
you are in a call.
12
EN
The speaker is on.
The ringer is off.
The silent mode is set and
within active period
(the phone does not ring).
Answering machine (D465
only): it flashes when there is
a new message or when the
memory is full. It is displayed
when the telephone
answering machine is turned
on.
Press and hold
the network voice mail
(network and country
dependent).
It flashes when there is a
new voice message.
It remains steadily on when
the voice messages are
already viewed in the call
log.
The icon is not shown when
there is no voice message.
The silent mode is set, but is
outside of active period.
The alarm is activated.
It is displayed when you
/
adjust the volume.
The Eco mode is activated.
The ECO+ mode is activated.
Check the signal
strength
The number of bars
indicates the connection
status between the handset
and base station. The more
bars are shown, the better
the connection is.
to access