Philips D465 Extended User Documentation page 37

Activate/deactivate the remote
access
You can allow or block remote access
to the answering machine.
1
Press / or [Menu] > [Answer
machine] > [Remote access], then
press [OK] to confirm.
2
Select [Activate]/[Deactivate], then
press [OK] to confirm.
» The setting is saved.
Change the PIN code
1
or [Menu] > [Answer
Press /
machine] > [Remote access] >
[Change PIN], then press [OK] to
confirm.
2
Enter the old PIN, then press [OK]
to confirm.
3
Enter the new PIN code, then
press [OK] to confirm.
4
Enter the new PIN code again,
then press [Save] to confirm.
» The setting is saved.
Access the answering machine
remotely
1
Make a call to your home number
with a touch tone phone.
2
Enter # when you hear the
announcement.
3
Enter your PIN code.
» You now have access to your
answering machine, and you
can now listen to the new
messages.
Note
•
You have 2 chances to enter the correct PIN
code before your phone hangs up.
4
Press a key to carry out a function.
See the Remote access commands
table below for a list of available
functions.
Note
•
When there is no message, the phone hangs
up automatically if no key is pressed for 8
seconds.
•
When the answering machine is turned off
but the remote access function is activated,
the answering machine will still pick up the
call in [Answer only] mode after 10 rings.
EN
35